English
- Home
- About Us
- Products
- Catalogues Download
- Rigging Hardware
- Aluminum Snap Hooks
- G120 Components
- G100 Components
- G80 Components
- G70 Chain & Fittings
- Turnbuckles
- Shackles
- Heavy Duty Shackles
- Load Binders
- Viking Hooks / Links / Rings
- Carbine Hooks
- Eye Bolts & Nuts
- Wire Rope Clips
- Wire Rope Thimbles
- Wire Rope Sleeve / Ferrules
- Wire Rope Sockets
- Swivels & D Rings
- Quick Links & Snap Hooks
- Link and Ring
- Solid Brass Products
- Hooks
- Other Hooks & Rings
- Fishing & Aquaculture
- Swivels
- Hooks
- Trawl Blocks
- Kellys Eyes
- Thimbles
- Terminals
- Connectors
- Trawling Chain
- Fishing Shackles
- G-Hooks & Recessed links
- Rings & Master Links
- Split Links & Links
- Stoppers
- Trawlfloats
- Fenders and Buoys
- Rubber Material
- Quick Links
- Carabine Hooks
- Rigging Screws
- Ferrules
- Wire Rope Clips
- Lifting
- Synthetic Rope
- Polyester Slings & Loadbinders
- Tools
- Synthetic Fibre Lifting Slings & Harness
- Webbing Sling EN1492-1
- Webbing Sling ASME
- Webbing Sling AS 1353
- One Way Sling
- HMPE Round Slings
- Round Sling EN1492-2
- Round Sling ASME ANSI B30.9
- Round Sling AS 4497
- Eye & Eye Round Slings
- Webbing Sling Endless Type
- Lifting Slings Material
- Synthetic Bridle Slings
- Fire-Resistant Products
- Safety Harness、Belts、Energy Absorber Lanyard & Metal Fittings
- Cloverleaf Slings & Sling Bags
- Transport & Load Restraints
- Load Binders
- Ratchet Strap EN12195-2
- Ratchet Strap ASTM B.30.9
- Ratchet Strap AS / NZS4380.2014
- Ratchet Tie Down Set
- Ratchet Buckle & Lashing Fittings
- One Way Lashing System
- Slack Line
- Winch Strap & Tow Strap
- Air Dunnage Bag
- Bungee Cord & Elastic Straps
- Cargo Nets
- Hand Winch & Hand Puller
- Lashing Winch & Winch Bar
- Pan Fitting
- Manual Hoists & Lifting Equipment
- Lifting Clamps
- Transport Trolleys
- Clean Room Lift
- Stage Hoisting Equipments
- Chain Hoist / Chain block
- Lever Hoist / Lever Block
- Non-Sparking Chain Block & Lever Hoist
- Stainless Steel Chain Block & Lever Hoist
- Trolley & Beam Clamps
- Non-Spark Trolley & Beam Clamps
- Stainless Steel Trolley & Beam Clamps
- Permanent Magnetic Lifter
- Snatch Block & Pulley
- Hand Winch & Hand Puller
- Wire Rope Hoist
- Crane Scales
- Spring Balancer
- Stainless Steel Hardware
- Stainless Steel Clean Room Lift
- Stainless Steel 316 Drop Forged Rigging Hardware
- Stainless Steel Chains
- Stainless Steel Terminals
- Stainless Steel Turnbuckles
- Stainless Steel Shackles
- Stainless Steel Snap Hooks
- Stainless Steel Hooks
- Stainless Steel Links
- Stainless Steel Rings
- Stainless Steel Swivels
- Stainless Steel Eye Plate
- Stainless Steel Bolts & Nuts
- Stainless Steel Wire Rope Clip
- Stainless Steel Wire Rope Thimble
- Stainless Steel Blocks & Pulley
- AISI Pipe Fitting
- AISI Deck Hardware
- AISI Anchor & Fitting
- Chain & Accessories
- Fiber Ropes
- Marine Hardware
- Wire Rope Cables & Accessories
- Wire Cable & Steel Tie Rod
- Steel Metallurgical Wire Rope
- Oilfield Wire Rope
- Wire Rope for Port Machinery
- Wire Rope for Construction Machinery
- Wire Rope for Coal and Mining
- Wire Rope for Oceanography
- Steel Wire Rope
- Wire Rope Slings
- Wire Rope Clips
- Wire Rope Sleeve / Ferrules
- Wire Rope Sockets
- Wire Rope Thimbles
- Steel Wire Rope and Wire Equipments
- Precast Concrete Lifting Device
- Cargo Control
- Lifting & Rigging Machine
- Prestress Steel Wire
- Electric Chain & Wire Rope Hoist
- Mini Electric Wire Rope Hoist
- Pneumatic Lifting Equipments
- Tripod & Gantry Cranes
- Auto Accessory & Material Handling Equipment
- Container Securing and Lashing Products
- Personal Protective Equipment & Hooks
- Security Seals
- Auto Towing & Hauling
- Off Road Products
- Towing & Automotive
- Hydraulic Tools
- Battery Hydraulic Tools
- Electric Punching Machine
- Hydraulic Steel Cutter
- Hydraulic Crimping Tools
- Split Unit Hydraulic Crimping Tools
- Hydraulic Compression Tools for Power Transmission Line
- Hydraulic Punch Machine
- Heavy Duty Hydraulic Punch Machine
- Hydraulic Cutting Machine
- Hydraulic Bending Machine
- Hydraulic Punching Cutting & Bending Machine
- Hydraulic Angle Iron Cutting Machine
- Hydraulic Busbar Embossing Machine
- Hydraulic Flange Seperator
- Tools
- Construction & Other Products
- Anchor Bolts
- Bracket Products
- Construction Scaffolding
- Dowel Pile Series
- Ground Screws
- Iron Wire Poducts
- Other Scaffolding Hardwares
- Plastic Products
- Scaffolding Coupler Fittings
- Scaffolding Couplers
- Scaffolding Frame System
- Tie Bar Series
- Adjustable Pipe Support
- Beam
- Plywoood
- Steel planks
- Wall, Column, Slab Formwork
- Wrenches
- OEM & ODM Products
- Information
- Application
- Contact Us
- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
COMPANY PROFILE
DAWSON GROUP LTD. is an ISO 9001 certified firm , specializes in the field of Lifting & Hoisting Equipments, Lashing Equipments, Material Handling Equipments, Rigging & Marine hardware, Wire Ropes, Chains, Polyester Slings, Ratchet Straps, Auto parts, Tools and other products.
DAWSON (QINGDAO) MANUFACTURING CO., LTD. , QINGDAO DAWSON INDUSTRIES CO., LTD. , and QINGDAO DAWSON IMPORT & EXPORT CO., LTD. are subsidiaries of DAWSON GROUP LTD. , mainly responsible for manufacturing, import and export business. We are located in Qingdao, China with convenient transportation access. All products are produced under strict standard of quality control, and constant research and development ensures that you are getting the latest products produced with the most advanced and cost effective technologies.
Most of our products are CE, TUV & GS certified. The marine products we approved by CCS,ABS, LR, DNV, BV, GL, KR, KN, and RINA certificates.
Most of our products are CE, TUV & GS certified. The marine products we approved by CCS,ABS, LR, DNV, BV, GL, KR, KN, and RINA certificates.
OUR MISSION: YOUR SAFETY, WE SECURE!
OUR VISION: BUILD A WORLD-RENOWNED LIFTING & RIGGING COMPANY,
AND A WORLD-CLASS “ DAWSON ” BRAND.
BECOME THE MOST HAPPINESS HONOR COMPANY!
AND A WORLD-CLASS “ DAWSON ” BRAND.
BECOME THE MOST HAPPINESS HONOR COMPANY!
OUR VALUES: CUSTOMER FIRST, EMBRACE CHANGE, TEAMWORK, INTEGRITY, EFFICIENCY, DEDICATION.
CATEGORIES
We take customer-friendly,quality-oriented,integrative,innovative
HOT PRODUCTS
SHACKLES
Chain Shackles Screw Pin Forged Alloy High Tensile Strength to US Federal Specification, EN 13889:2003+A1:2008 D210 Shackles are supplied in hot dip galvanized finish or self colored. Working Load Limit permanently shown on every shackle.
$0
$0
Chain Shackle Bolt Type Forge Alloy High Tensile US Federal Specification, EN 13889:2003+A1:2008 DG2150 S2150 Shackles are supplied in hot dip galvanized finish or self colored. Working Load Limit permanently shown on every shackle. Capacities 1/3 thru 150 metrics tons. Forged - Quenched and Tempered. Capacities 1/3 thru 85 metric tons.
$0
$0
WLL:55t-2000t Wide shackle uses overall forged alloy steel, its safety factor (testing load to working load): 2 for 55t-300t; 1.5 for 400t; 1.33 for 500t-2000t, it suits for connection of synthetic fiber sling and wire rope sling.
$0
$0
$0
$0
Anchor Shackles, Screw Collar Pin, Forged Alloy Steel, High Tensile Strength, Meet to US Federal Specification. Finish: Anchor Shackles are supplied in hot dip galvanized finish or self colored. Working Load Limit: permanently shown on every Anchor shackle. Shackle Material: High tensile steel Forged - Quenched and Tempered. Shackle Size: Capacities 1/3 thru 120 metric tons. 85ton and 120ton shackle are available. Fatigue rated
$0
$0
Forged super alloy steel - Quenched and Tempered. Suitable for EN818-2 G80 chain. Individually proof test at 2.5 times Working Load Limit. Fatiuge tested at 1.5 times Working Load Limit for 20000 cycles. Breakage test. 100% magnaflux crack detection. All load pins are 100% individually inspected and tested. Surface finish:Powder plastified. Colour code:Red RAL3020/Yellow RAL1003.
$0
$0
Galv. Dee Shackles Commercial European Type Finish: Self color, Electric Galv. or Hot dipped Galv. Material: Mild steel/Carbon steel C1045 Packing: In gunny bags Notice: Shackles not to be used for Lifting applications Following Size are available: Screw collar pin -- all size Square head Pin-from 6 up to 38MM Counter sunk pin-from 8 up to 26MM
$0
$0
Galv. Bow Shackle, European Commercial Type Finish: Self color, Electric Galv. Material: Mild steel/Carbon steel C1045 Packing: In Cartons or In gunny bags. Notice: Shackles not to be used for Lifting applications Following Size are available: Screw collar pin -- all size Square head Pin-from 6 up to 38MM Counter sunk pin-from 8 up to 25MM
$0
$0
RATCHET STRAPS & TOW STRAPS
1) material: 100% polyester 2) webbing width: 50mm 3) safety factor: 2:1 4) Capacity: 5T 5) manufactured according to DIN EN12195-2 6) color: according to your requirement 7) end fittings: double J hook, claw hook, triangle hook or other hook you required 8) ergo ratchet, long handle pull type 9) breaking load of the webbing: 7500 kgs.
$0
$0
**100% high tenacity polyester of lashing strap **Low elongation **Popular color of strap:orange,blue,yellow,red,black **Width available: 25mm to 100mm **Breaking strength scope: 0.5t to 10t **Length available: 1m to 10m **According to EN 12195/2
$0
$0
Webbing Color: Yellow Width: 2" Length: 27' Assembly Break Strength: 10,000 lbs Work Load Limit: 3,333 lbs
$0
$0
Width available:25mm to 100mm Breaking strength scope:0.5t to 10t Length available:1m to 10m Min Order: 1000pcs Material: 100% high tenacity polyester Sales Models: Wholesale
$0
$0
Lashing capacity: 3800kg Diameter chain / hook:7.3-8mm complete with winged grab Hooks New Design generally used for steel cartage. AS NZS 4344 2001
$0
$0
**100% high tenacity polyester of lashing strap **Low elongation **Popular color of strap:orange,blue,yellow,red,black **Width available:25mm to 100mm **Breaking strength scope:0.5t to 10t **Length available:1m to 10m
$0
$0
Available width: from 32mm-50mm Webbing breaking strength from 200daN to 7500daN. Can be used together with different One Way Buckle.
$0
$0
LIFTING SLINGS
-Color coded according to EN 1492-1. -According to Machine Directive 98/37/EC. -Safety Factor: 7:1 -Safety Factor of 6:1 or 5:1 is available upon request
$0
$0
-Color coded according to EN 1492-1. -According to Machine Directive 98/37/EC. -Safety Factor: 7:1 -Safety Factor of 6:1 or 5:1 is available upon request
$0
$0
-Color coded according to EN 1492-1. -According to Machine Directive 98/37/EC. -Safety Factor: 7:1 -Safety Factor of 6:1 or 5:1 is available upon request
$0
$0
-Color coded according to EN 1492-1. -According to Machine Directive 98/37/EC. -Safety Factor: 7:1 -Safety Factor of 6:1 or 5:1 is available upon request
$0
$0
-Color coded according to EN 1492-1. -According to Machine Directive 98/37/EC. -Safety Factor: 7:1 -Safety Factor of 6:1 or 5:1 is available upon request
$0
$0
-Color coded according to EN 1492-1. -According to Machine Directive 98/37/EC. -Safety Factor: 7:1 -Safety Factor of 6:1 or 5:1 is available upon request
$0
$0
-Color coded according to EN 1492-1. -According to Machine Directive 98/37/EC. -Safety Factor: 7:1 -Safety Factor of 6:1 or 5:1 is available upon request
$0
$0
-Color coded according to EN 1492-1. -According to Machine Directive 98/37/EC. -Safety Factor: 7:1 -Safety Factor of 6:1 or 5:1 is available upon request
$0
$0
-Color coded according to EN 1492-1. -According to Machine Directive 98/37/EC. -Safety Factor: 7:1 -Safety Factor of 6:1 or 5:1 is available upon request
$0
$0
-Color coded according to EN 1492-1. -According to Machine Directive 98/37/EC. -Safety Factor: 7:1 -Safety Factor of 6:1 or 5:1 is available upon request
$0
$0
-Color coded according to EN 1492-1. -According to Machine Directive 98/37/EC. -Safety Factor: 7:1 -Safety Factor of 6:1 or 5:1 is available upon request
$0
$0
-Color coded according to EN 1492-1. -According to Machine Directive 98/37/EC. -Safety Factor: 7:1 -Safety Factor of 6:1 or 5:1 is available upon request
$0
$0
-Color coded according to EN 1492-1. -According to Machine Directive 98/37/EC. -Safety Factor: 7:1 -Safety Factor of 6:1 or 5:1 is available upon request
$0
$0
-Color coded according to EN 1492-1. -According to Machine Directive 98/37/EC. -Safety Factor: 7:1 -Safety Factor of 6:1 or 5:1 is available upon request
$0
$0
Colour coded according to EN 1492-1. Single or double ply. Sales Models: Wholesale Min Order: 1000 pcs
$0
$0
ROUND SLINGS
Material： 100% high-strength polyester yarn Safety Factor：6:1 7:1 8:1 Standard： ISO: ISO4878 European: EN1492-2:2000 Australian: AS 4497
$0
$0
Material： 100% high-strength polyester yarn Safety Factor：6:1 7:1 8:1 Standard： ISO: ISO4878 European: EN1492-2:2000 Australian: AS 4497
$0
$0
Material： 100% high-strength polyester yarn Safety Factor：6:1 7:1 8:1 Standard： ISO: ISO4878 European: EN1492-2:2000 Australian: AS 4497
$0
$0
Material： 100% high-strength polyester yarn Safety Factor：6:1 7:1 8:1 Standard： ISO: ISO4878 European: EN1492-2:2000 Australian: AS 4497
$0
$0
Material： 100% high-strength polyester yarn Safety Factor：6:1 7:1 8:1 Standard： ISO: ISO4878 European: EN1492-2:2000 Australian: AS 4497
$0
$0
Material： 100% high-strength polyester yarn Safety Factor：6:1 7:1 8:1 Standard： ISO: ISO4878 European: EN1492-2:2000 Australian: AS 4497
$0
$0
Material： 100% high-strength polyester yarn Safety Factor：6:1 7:1 8:1 Standard： ISO: ISO4878 European: EN1492-2:2000 Australian: AS 4497
$0
$0
Material： 100% high-strength polyester yarn Safety Factor：6:1 7:1 8:1 Standard： ISO: ISO4878 European: EN1492-2:2000 Australian: AS 4497
$0
$0
Material： 100% high-strength polyester yarn Safety Factor：6:1 7:1 8:1 Standard： ISO: ISO4878 European: EN1492-2:2000 Australian: AS 4497
$0
$0
Material： 100% high-strength polyester yarn Safety Factor：6:1 7:1 8:1 Standard： ISO: ISO4878 European: EN1492-2:2000 Australian: AS 4497
$0
$0
Material： 100% high-strength polyester yarn Safety Factor：6:1 7:1 8:1 Standard： ISO: ISO4878 European: EN1492-2:2000 Australian: AS 4497
$0
$0
Material： 100% high-strength polyester yarn Safety Factor：6:1 7:1 8:1 Standard： ISO: ISO4878 European: EN1492-2:2000 Australian: AS 4497
$0
$0
Material： 100% high-strength polyester yarn Safety Factor：6:1 7:1 8:1 Standard： ISO: ISO4878 European: EN1492-2:2000 Australian: AS 4497
$0
$0
Material： 100% high-strength polyester yarn Safety Factor：6:1 7:1 8:1 Standard： ISO: ISO4878 European: EN1492-2:2000 Australian: AS 4497
$0
$0
Material： 100% high-strength polyester yarn Safety Factor：6:1 7:1 8:1 Standard： ISO: ISO4878 European: EN1492-2:2000 Australian: AS 4497
$0
$0
Material： 100% high-strength polyester yarn Safety Factor：6:1 7:1 8:1 Standard： ISO: ISO4878 European: EN1492-2:2000 Australian: AS 4497
$0
$0
Material： 100% high-strength polyester yarn Safety Factor：6:1 7:1 8:1 Standard： ISO: ISO4878 European: EN1492-2:2000 Australian: AS 4497
$0
$0
Material： 100% high-strength polyester yarn Safety Factor：6:1 7:1 8:1 Standard： ISO: ISO4878 European: EN1492-2:2000 Australian: AS 4497
$0
$0
Material： 100% high-strength polyester yarn Safety Factor：6:1 7:1 8:1 Standard： ISO: ISO4878 European: EN1492-2:2000 Australian: AS 4497
$0
$0
Material： 100% high-strength polyester yarn Safety Factor：6:1 7:1 8:1 Standard： ISO: ISO4878 European: EN1492-2:2000 Australian: AS 4497
$0
$0
ELECTRIC CHAIN & WIRE ROPE HOIST
$0
$0
Capacity: 150-2000kg Sales Models: Wholesale Min Order: 1000pcs
$0
$0
Positive action brake can hold the load in any position. Compact, light weight and rugged construction. The brake is sealed in strong steel cover to protect from dust and rain. Stainless steel material(optional) for resistance to rust and corrosion. Only for pulling. Sales Models: Wholesale Min Order: 1000pcs
$0
$0
Model: DSHW-D Sales Models: Wholesale Min Order: 10pcs
$0
$0
LIFTING EQUIPMENTS & SAFETY PRODUCTS
$0
$0
The adoption of low-alloy structural steel plate, safe, reliable and durable. G80 high strength load chain, high safety factor and long service life. Steady rotation, high efficiency, mall lever force. Products certified by CE and GS. Double pawl keep safe and reliable. The products have been widely used in nuclear power, thermal power transmission and transmission etc. Optional overload protection. The electric chain guard device is optional, which can make sure smooth and avoid jammed when you are pulling the load chain.
$0
$0
The adoption of low-alloy structural steel plate, safe, reliable and durable. G80 high strength load chain, high safety factor and long service life. Steady rotation, high efficiency, mall lever force. Products certified by CE and GS. Double pawl keep safe and reliable. The products have been widely used in nuclear power, thermal power transmission and transmission etc. Optional overload protection. The electric chain guard device is optional, which can make sure smooth and avoid jammed when you are pulling the load chain.
$0
$0
LIFTING CLAMPS
Use： ● For horizontal lifting and transporting of steel and concrete pipes. ● Compact shapes and relatively low own weight with a high lifting capacity. ● The surface is equipped with “special” plastic. ●The DS-TPH will be delivered per pair. ● Plastic cover is easy to change.
$0
$0
Working load limit(WLL)0.8-16T Use： ● For lifting and transporting of steel plates and structures from all positions (horizontal, vertical and sidelong). ● Articulated lifting shackle（CD type）. ● Clamps are equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered. ●The clamp is locked in closed as well as in open position. ●Manufactured from high quality carbon steel
$0
$0
Working load limit(WLL)：0.8-30T. Use： ● Suitable for lifting and transport of steel plates 、construction and profiled bar in horizontal position. ● Manufactured from high quality carbon steel. ● Avoid snatch or shock loading. ● The working load limit is the maximum load that the clamp are authorized to support when used in pairs with a lift angle of 60°.In lifting operations the clamps can be used in pairs or multiples.
$0
$0
Working Load Limit(WLL) 0.5-5T DS-KNMK / DS-KNMKA is a Non-marking clamp with 2 special synthetic pads.The Clamp can be used for lifting, handling and transporting stainless, steel, aluminum, copper, wood and marble from all positions(vertical and horizontal) and will not leave any marks. The clamp is locked in closed as well as in open position. Manufactured from high quality carbon steel.
$0
$0
Working load limit(WLL)：1.5-20T. Use： ● For horizontal lifting and transporting of steel and concrete pipes. ● Compact shapes and relatively low own weight with a high lifting capacity. ● The surface is equipped with “special” plastic. ●The DS-TPH will be delivered per pair. ● Plastic cover is easy to change.
$0
$0
Working load limit(WLL)：0.8-5T. Use： ● For lifting and transporting of thick steel plates. ● Articulated lifting shackle. ● The clamp is fitted with a locking device for both open and closed positions, which ensures complete safety. ● The clamp is locked in closed as well as in open position. ● Manufactured from high quality carbon steel.
$0
$0
Working load limit(WLL)：0.8-1.6T. Use： ● Specially designed for the transfer of small profiles. ● Articulated lifting shackle. ● The clamp is fitted with a locking device for both open and closed positions which ensures complete safety. ● Manufactured from high quality carbon steel ● The CDD 0.8T can be used for lifting drums. ● The clamp is locked in closed as well as in open position.
$0
$0
Working load limit(WLL)：1-10T. Use： ● For horizontal lifting and transporting of steel plates. ● The compact shape and relative light own weight with a high lifting capacity. ● The DS-THK/THKS lifting clamps must always be used in pairs (or multiples thereof). ● DS-THK has an enlarged jaw opening.
$0
$0
Working load limit(WLL)：1-20T. Use： ● Provides a quick and versatile rigging for hoisting equipment ,pulley blocks or loads. ● Flexible application due to wide adjustment range. ● The central threaded spindle allows easy attachment and a safe secure grip. ● The spindle can be secured against loosening. ● Option: Small dimensions for applications at beams with a low base height.
$0
$0
G100 RIGGING PRODUCTS
Forged super alloy steel. Suitable for use with G100 chain. 25% stronger than G80. Individually proof tested at 2.5 times Working Load Limit. 100% Magnaflux Crack Detection. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Meet standard EN1677. Strict break load test. Surface finish: Powder plastified Colour: blue RALcode: RAL5015 All load pin are 100% individually inspected and tested.
$0
$0
$0
$0
Forged or welded super alloy steel. Suitable for use with G100 chain. 25% stronger than G80. Individually proof tested at 2.5 times Working Load Limit. 100% Magnaflux Crack Detection. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Meet standard EN1677. Strict break load test. Surface finish: plastic spraying Colour: blue RAL code: RAL5015, other colour is available as per request. All load pin are 100% individually inspected and tested.
$0
$0
Forged or welded super alloy steel. Suitable for use with G100 chain. 25% stronger than G80. Individually proof tested at 2.5 times Working Load Limit. 100% Magnaflux Crack Detection. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Meet standard EN1677. Strict break load test. Surface finish: Power plastified Colour: blue RALcode: RAL5015 All load pin are 100% individually inspected and tested.
$0
$0
Forged or welded super alloy steel. Individually proof tested at 2.5 times Working Load Limit. 100% Magnaflux Crack Detection. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Meet standard EN1677. Strict break load test. Surface finish: Power plastified Colour: blue RALcode: RAL5015 All load pin are 100% individually inspected and tested.
$0
$0
Forged or welded super alloy steel. Suitable for use with G100 chain. 25% stronger than G80. Individually proof tested at 2.5 times Working Load Limit. 100% Magnaflux Crack Detection. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Meet standard EN1677. Strict break load test. Surface finish: Power plastified Colour: blue RALcode: RAL5015 All load pin are 100% individually inspected and tested.
$0
$0
Forged or welded super alloy steel. Suitable for use with G100 chain. 25% stronger than G80. Individually proof tested at 2.5 times Working Load Limit. 100% Magnaflux Crack Detection. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Meet standard EN1677. Strict break load test. Surface finish: Power plastified Colour: blue RALcode: RAL5015 All load pin are 100% individually inspected and tested.
$0
$0
Forged or welded super alloy steel. Suitable for use with G100 chain. 25% stronger than G80. Individually proof tested at 2.5 times Working Load Limit. 100% Magnaflux Crack Detection. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Meet standard EN1677. Strict break load test. Surface finish: Power plastified Colour: blue RALcode: RAL5015 All load pin are 100% individually inspected and tested.
$0
$0
Features ● It is forged by special alloy steel with high intensity and high toughness, and then it is heat treated. ● It can be matched with G100 chains. ● The performance is increased by 25% compared with G80 products. ● Each work piece should pass testing at 2.5 times of working load limit. ● We should carry out sampling and 20000 times of fatigue testing. ● We should carry out strict sampling and breakage testing for each batch of products. ● We should carry out 100% magnetic powder flaw detection. ● Surface treatment: plastics spraying. ● Color code: Blue RAL5015. ● All sizes are forged.
$0
$0
Features ● It is forged by special alloy steel with high intensity and high toughness, and then it is heat treated. ● It can be matched with G100 chains. ● The performance is increased by 25% compared with G80 products. ● Each work piece should pass testing at 2.5 times of working load limit. ● We should carry out sampling and 20000 times of fatigue testing. ● We should carry out strict sampling and breakage testing for each batch of products. ● We should carry out 100% magnetic powder flaw detection. ● Surface treatment: plastics spraying. ● Color code: Blue RAL5015. ● All sizes are forged.
$0
$0
Features ● It is forged by special alloy steel with high intensity and high toughness, and then it is heat treated. ● It can be matched with G100 chains. ● The performance is increased by 25% compared with G80 products. ● Each work piece should pass testing at 2.5 times of working load limit. ● We should carry out sampling and 20000 times of fatigue testing. ● We should carry out strict sampling and breakage testing for each batch of products. ● We should carry out 100% magnetic powder flaw detection. ● Surface treatment: plastics spraying. ● Color code: Blue RAL5015. ● All sizes are forged.
$0
$0
Features ● It is forged by special alloy steel with high intensity and high toughness, and then it is heat treated. ● It can be matched with G100 chains. ● The performance is increased by 25% compared with G80 products. ● Each work piece should pass testing at 2.5 times of working load limit. ● We should carry out sampling and 20000 times of fatigue testing. ● We should carry out strict sampling and breakage testing for each batch of products. ● We should carry out 100% magnetic powder flaw detection. ● Surface treatment: plastics spraying. ● Color code: Blue RAL5015. ● All sizes are forged.
$0
$0
Features ● It is forged by special alloy steel with high intensity and high toughness, and then it is heat treated. ● It can be matched with G100 chain. ● The performance is increased by 25% compared with G80 products. ● Each work piece should pass testing at 2.5 times of working load limit. ● We should carry out sampling and 20000 times of fatigue testing. ● We should carry out strict sampling and breakage testing for each batch of products. ● We should carry out 100% magnetic powder flaw detection. ● Surface treatment: plastics spraying. ● Color code: Blue RAL5015. ● All sizes are forged.
$0
$0
● It can not be used for lifting. It can only be used for dragging or lashing in logging industry. ● Ultimate load is 4 times the Working Load Limit. ● It is forged by special alloy steel with high intensity and high toughness, and then it is heat treated; ● The performance is increased by 25% compared with G80 products; ● We should carry out strict sampling and breakage testing for each batch of products; ● We should carry out 100% magnetic powder flaw detection; ● Surface treatment: plastics spraying; ● Color code: Blue RAL5015.
$0
$0
Forged or welded super alloy steel. Suitable for use with G100 chain. 25% stronger than G80. Individually proof tested at 2.5 times Working Load Limit. 100% Magnaflux Crack Detection. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Meet standard EN1677. Strict break load test. Surface finish: Powder plastified Colour: blue RALcode: RAL5015 All load pin are 100% individually inspected and tested.
$0
$0
According to EN12195-3 standard. Handle:forged. Suitable for G100 chain. Not for lifting,only for lashing. It is a G100 eye grab hook with stop pin to ensure safety and prevent falling off. With G100 eye grab hook with safety pin. Surface finish: Powder plastifited Colour code: Blue RAL5015, other colour is available as per request.
$0
$0
Min Order: 1000pcs Sales Models: Wholesale Forged or welded super alloy steel. Suitable for use with G100 chain. It meets the standard of EN12195-3. The handle is forged. It is a G100 eye grab hook with stop pin to ensure safety and prevent falling off. It can only be used for lashing but not lifting. Surface treatment: plastic spraying. Color code: blue RAL5015.
$0
$0
G100 RIGGING PRODUCTS
Forged super alloy steel Quenched and Tempered. Suitable for use with G100 chain. 25% stronger than G80. Individually proof tested at 2.5 times Working Load Limit. 100% Magnaflux Crack Detection. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Meet standard EN1677. Strict break load test. Surface finish: Powder plastified Colour: blue RALcode: RAL5015 With cast latch.
$0
$0
The alloy steel self locking eye hook has the following features ● The self locking structure of the hook will be automatically closed under the situation of load lifting, so that the lifting is much safer. ● It is forged by special alloy steel with high intensity and high toughness, and then it is heat treated; ● It can be matched with G100 chain; ● The performance is increased by 25% compared with G80 products; ● Each work piece should pass testing at 2.5 times of working load limit; ● We should carry out sampling and 20000 times of fatigue testing; ● We should carry out strict sampling and breakage testing for each batch of products; ● We should carry out 100% magnetic powder flaw detection; ● 100% of the pin should be tested to ensure that they have the same hardness; ● Surface treatment: plastics spraying; ● Color code: Blue RAL5015.
$0
$0
● It is forged by special alloy steel with high intensity and high toughness, and then it is heat treated; ● It can be matched with G100 chain; ● The performance is increased by 25% compared with G80 products; ● Each work piece should pass testing at 2.5 times of working load limit; ● We should carry out sampling and 20000 times of fatigue testing; ● We should carry out strict sampling and breakage testing for each batch of products; ● We should carry out 100% magnetic powder flaw detection; ● 100% of the pin should be tested to ensure that they have the same hardness; ● Surface treatment: Powder plastified; ● Color code: Blue RAL5015, other colour is available as per request; ● It is equipped with a spare part, cast latch.
$0
$0
Forged or welded super alloy steel. Suitable for use with G100 chain. 25% stronger than G80. Individually proof tested at 2.5 times Working Load Limit. 100% Magnaflux Crack Detection. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Meet standard EN1677. Strict break load test. Surface finish: Power plastified Colour: blue RALcode: RAL5015 All load pin are 100% individually inspected and tested.
$0
$0
Forged or welded super alloy steel. Suitable for use with G100 chain. 25% stronger than G80. Individually proof tested at 2.5 times Working Load Limit. 100% Magnaflux Crack Detection. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Meet standard EN1677. Strict break load test. Surface finish: Powder plastified Colour: blue RALcode: RAL5015 All load pin are 100% individually inspected and tested.
$0
$0
Suitable for use with G100 chain. 25% stronger than G80. Individually proof tested at 2.5 times Working Load Limit. 100% Magnaflux Crack Detection. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Meet standard EN1677. Strict break load test. Surface finish: Powder plastified Colour: blue RALcode: RAL5015, other colour is available as per request. All load pin are 100% individually inspected and tested.
$0
$0
Forged or welded super alloy steel. Suitable for use with G100 chain. 25% stronger than G80. Individually proof tested at 2.5 times Working Load Limit. 100% Magnaflux Crack Detection. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Meet standard EN1677. Strict break load test. Surface finish: Powder plastified Colour: blue RALcode: RAL5015 All load pin are 100% individually inspected and tested.
$0
$0
● It is forged by special alloy steel with high intensity and high toughness, and then it is heat treated; ● It can be matched with G100 chain; ● The performance is increased by 25% compared with G80 products; ● Each work piece should pass testing at 2.5 times of working load limit; ● We should carry out sampling and 20000 times of fatigue testing; ● We should carry out strict sampling and breakage testing for each batch of products; ● We should carry out 100% magnetic powder flaw detection; ● 100% of the pin should be tested to ensure that they have the same hardness; ● Surface treatment: plastics spraying; ● Color code: Blue RAL5015.
$0
$0
Forged or welded super alloy steel. Suitable for use with G100 chain. 25% stronger than G80. Individually proof tested at 2.5 times Working Load Limit. 100% Magnaflux Crack Detection. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Meet standard EN1677. Strict break load test. Surface finish: Powder plastified Colour: blue RALcode: RAL5015 All load pin are 100% individually inspected and tested.
$0
$0
Forged or welded super alloy steel. Suitable for use with G100 chain. 25% stronger than G80. Individually proof tested at 2.5 times Working Load Limit. 100% Magnaflux Crack Detection. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Meet standard EN1677. Strict break load test. Surface finish: Powder plastified Colour: blue RALcode: RAL5015 All load pin are 100% individually inspected and tested.
$0
$0
Forged or welded super alloy steel. Suitable for use with G100 chain. 25% stronger than G80. Individually proof tested at 2.5 times Working Load Limit. 100% Magnaflux Crack Detection. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Meet standard EN1677. Strict break load test. Surface finish: Powder plastified Colour: blue RALcode: RAL5015 All load pin are 100% individually inspected and tested.
$0
$0
● It is forged by special alloy steel with high intensity and high toughness, and then it is heat treated; ● It can be matched with G100 chain; ● The performance is increased by 25% compared with G80 products; ● Each workpiece should pass testing at 2.5 times of working load limit; ● We should carry out sampling and 20000 times of fatigue testing; ● We should carry out strict sampling and breakage testing for each batch of products; ● We should carry out 100% magnetic powder flaw detection; ● 100% of the pin should be tested to ensure that they have the same hardness; ● Surface treatment: plastics spraying; ● Color code: Blue RAL5015.
$0
$0
● It is forged by special alloy steel with high intensity and high toughness, and then it is heat treated; ● It can be matched with G100 chain; ● The performance is increased by 25% compared with G80 products; ● Each workpiece should pass testing at 2.5 times of working load limit; ● We should carry out sampling and 20000 times of fatigue testing; ● We should carry out strict sampling and breakage testing for each batch of products; ● We should carry out 100% magnetic powder flaw detection; ● 100% of the pin should be tested to ensure that they have the same hardness; ● Surface treatment: plastics spraying; ● Color code: Blue RAL5015.
$0
$0
● It is forged by special alloy steel with high intensity and high toughness, and then it is heat treated; ● It can be matched with G100 chain; ● The performance is increased by 25% compared with G80 products; ● Each workpiece should pass testing at 2.5 times of working load limit; ● We should carry out sampling and 20000 times of fatigue testing; ● We should carry out strict sampling and breakage testing for each batch of products; ● We should carry out 100% magnetic powder flaw detection; ● 100% of the pin should be tested to ensure that they have the same hardness; ● Surface treatment: plastics spraying; ● Color code: Blue RAL5015.
$0
$0
Forged or welded super alloy steel. Suitable for use with G100 chain. 25% stronger than G80. Individually proof tested at 2.5 times Working Load Limit. 100% Magnaflux Crack Detection. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Meet standard EN1677. Strict break load test. Surface finish: Power plastified Colour: blue RALcode: RAL5015 All load pin are 100% individually inspected and tested.
$0
$0
Forged or welded super alloy steel. Suitable for use with G100 chain. 25% stronger than G80. Individually proof tested at 2.5 times Working Load Limit. 100% Magnaflux Crack Detection. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Meet standard EN1677. Strict break load test. Surface finish: Power plastified Colour: blue RALcode: RAL5015 All load pin are 100% individually inspected and tested.
$0
$0
It is forged by special alloy steel with high intensity and high toughness, and then it is heat treated; ● Forged or welded super alloy steel. ● Suitable for use with G100 chain. ● 25% stronger than G80. ● Meet standard EN1677. ● Each workpiece should pass testing at 2.5 times of working load limit; ● We should carry out sampling and 20000 times of fatigue testing; ● We should carry out strict sampling and breakage testing for each batch of products; ● We should carry out 100% magnetic powder flaw detection; ● 100% of the pin should be tested to ensure that they have the same hardness; ● Surface treatment: Powder plastified ● Colour: blue RALcode: RAL5015
$0
$0
G80 RIGGING PRODUCTS
Forged or welded super alloy steel. Suitable for use with G80 chain. Individually proof tested at 2.5 times Working Load Limit. 100% Magnaflux Crack Detection. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Meet standard EN1677. Strict break load test. Surface finish: Power plastified Colour: Yellow or Red RALcode: RAL1003 or RAL3020. All load pin are 100% individually inspected and tested.
$0
$0
Forged or welded super alloy steel. Suitable for use with G80 chain. Individually proof tested at 2.5 times Working Load Limit. 100% Magnaflux Crack Detection. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Meet standard EN1677. Strict break load test. Surface finish: Power plastified Colour: Yellow or Red RALcode: RAL1003 or RAL3020. All load pin are 100% individually inspected and tested.
$0
$0
Forged super alloy steel - Quenched and Tempered. Suitable for EN818-2 G80 chain. Individually proof tested at 2.5 times Working Load Limit. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Breakage test. 100% Magnaflux Crack Detection. With cast latch. Surface finish: Power plastified Colour: Yellow or Red RALcode: RAL1003 or RAL3020.
$0
$0
Forged super alloy steel - Quenched and Tempered. Suitable for EN818-2 G80 chain. Individually proof tested at 2.5 times Working Load Limit. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Breakage test. 100% Magnaflux Crack Detection. All load pins are 100% individually inspected and tested. With cast latch. Surface finish: Power plastified Colour: Yellow or Red RALcode: RAL1003 or RAL3020.
$0
$0
Forged or welded super alloy steel. Suitable for use with G80 chain. Individually proof tested at 2.5 times Working Load Limit. 100% Magnaflux Crack Detection. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Meet standard EN1677. Strict break load test. Surface finish: Power plastified Colour: Yellow or Red RALcode: RAL1003 or RAL3020. All load pin are 100% individually inspected and tested.
$0
$0
Forged or welded super alloy steel. Suitable for use with G80 chain. Individually proof tested at 2.5 times Working Load Limit. 100% Magnaflux Crack Detection. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Meet standard EN1677. Strict break load test. Surface finish: Power plastified Colour: Yellow or Red RALcode: RAL1003 or RAL3020. All load pin are 100% individually inspected and tested.
$0
$0
Forged or welded super alloy steel. Suitable for use with G80 chain. Individually proof tested at 2.5 times Working Load Limit. 100% Magnaflux Crack Detection. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Meet standard EN1677. Strict break load test. Surface finish: Power plastified Colour: Yellow or Red RALcode: RAL1003 or RAL3020. All load pin are 100% individually inspected and tested.
$0
$0
Forged or welded super alloy steel. Suitable for use with G80 chain. Individually proof tested at 2.5 times Working Load Limit. 100% Magnaflux Crack Detection. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Meet standard EN1677. Strict break load test. Surface finish: Power plastified Colour: Yellow or Red RALcode: RAL1003 or RAL3020. All load pin are 100% individually inspected and tested.
$0
$0
Forged or welded super alloy steel. Suitable for use with G80 chain. Individually proof tested at 2.5 times Working Load Limit. 100% Magnaflux Crack Detection. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Meet standard EN1677. Strict break load test. Surface finish: Power plastified Colour: Yellow or Red RALcode: RAL1003 or RAL3020. All load pin are 100% individually inspected and tested.
$0
$0
Forged super alloy steel - Quenched and Tempered. Suitable for EN818-2 G80 chain. Individually proof tested at 2.5 times Working Load Limit. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Breakage test. 100% Magnaflux Crack Detection. With safety latch. Surface finish: Power plastified Colour: Yellow or Red RALcode: RAL1003 or RAL3020.
$0
$0
Forged super alloy steel - Quenched and Tempered. Suitable for EN818-2 G80 chain. Individually proof tested at 2.5 times Working Load Limit. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Breakage test. 100% Magnaflux Crack Detection. Surface finish: Power plastified Colour: Yellow or Red RALcode: RAL1003 or RAL3020.
$0
$0
Forged super alloy steel - Quenched and Tempered. Suitable for EN818-2 G80 chain. Individually proof tested at 2.5 times Working Load Limit. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Breakage test. 100% Magnaflux Crack Detection. All load pins are 100% individually inspected and tested. Surface finish: Power plastified Colour: Yellow or Red RALcode: RAL1003 or RAL3020.
$0
$0
Forged super alloy steel - Quenched and Tempered. Suitable for EN818-2 G80 chain. Individually proof tested at 2.5 times Working Load Limit. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Breakage test. 100% Magnaflux Crack Detection. All load pins are 100% individually inspected and tested. Surface finish: Power plastified Colour: Yellow or Red RALcode: RAL1003 or RAL3020.
$0
$0
Forged super alloy steel - Quenched and Tempered. Suitable for web sling and G80 chain EN818-2. Individually proof tested at 2.5 times Working Load Limit. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Breakage test. 100% Magnaflux Crack Detection. All load pins are 100% individually inspected and tested. Surface finish: Power plastified Colour: Yellow or Red RALcode: RAL1003 or RAL3020.
$0
$0
Forged or welded super alloy steel. Suitable for use with G80 chain. Individually proof tested at 2.5 times Working Load Limit. 100% Magnaflux Crack Detection. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Meet standard EN1677. Strict break load test. Surface finish: Power plastified Colour: Yellow or Red RALcode: RAL1003 or RAL3020. All load pin are 100% individually inspected and tested.
$0
$0
Standard EN1677(Supersedes DIN5688-3). Forged or welded super alloy steel. Super alloy steel - Quenched and tempered. Individually proof tested at 2.5 times Working Load Limit. Breaking test and fatigue test. 100% Magnaflux Crack Detection. Fatigue tested at 1.5 times Working Load Limit for 20000 cycles. Strict break load test. Surface finish: Power plastified Colour: Yellow or Red RALcode: RAL1003 or RAL3020. All load pin are 100% individually inspected and tested. Suitable for 3 or 4 legs G80 chain sling as per EN818-4.
$0
$0
Forged or welded super alloy steel. Suitable for use with G80 chain. Individually proof tested at 2.5 times Working Load Limit. 100% Magnaflux Crack Detection. Meet standard EN1677. Strict break load test. Surface finish: Power plastified Colour: Yellow or Red RALcode: RAL1003 or RAL3020. All load pin are 100% individually inspected and tested.
$0
$0
Forged super alloy steel-Quenched and Temered. Individually proof tested at 2 times Working Load Limit. Breaking Test. 100% Magnaflux Crack Detection. Surface finish: Power plastified Colour: Yellow or Red RALcode: RAL1003 or RAL3020. All load pin are 100% individually inspected and tested. All sizes are forged. Red area: WLL
$0
$0
Forged super alloy steel-Quenched and Tempered. Individually proof tested at 2 times Working Load Limit. Breaking Test. 100% Magnaflux Crack Detection. Surface finish: Power plastified Colour: Yellow or Red RALcode: RAL1003 or RAL3020. All load pin are 100% individually inspected and tested.
$0
$0
Forged super alloy steel-Quenched and Tempered. Individually proof tested at MPF. Breaking Test 100% Magnaflux Crack Detection. Surface finish: Power plastified Colour: Yellow or Red RALcode: RAL1003 or RAL3020. All sizes are welded.
$0
$0
LIFTING POINTS
Forged super alloy steel - Quenched and Tempered. Breakage test. 100% Magnaflux Crack Detection. Surface finish: Power plastified Colour: Yellow or Red RALcode: RAL1003 or RAL3020. With spring inside for better pivoting control. Welding is to be performed by a qualified welder.
$0
$0
Forged super alloy steel - Quenched and Tempered. Individually proof test at 2.5 times Working Load Limit. Fatiuge tested at 1.5 times Working Load Limit for 20000 cycles. Breakage test. 100% magnaflux crack detection. Surface finish: Powder plastified. Colour code:Red RAL3020/Yellow RAL1003
$0
$0
Forged super alloy steel - Quenched and Tempered. Individually proof test at 2.5 times Working Load Limit. Fatiuge tested at 1.5 times Working Load Limit for 20000 cycles. Breakage test. 100% magnaflux crack detection. Surface finish: Powder plastified. Colour code:Red RAL3020/Yellow RAL1003
$0
$0
Forged super alloy steel - Quenched and Tempered. Individually proof test at 2.5 times Working Load Limit. Fatiuge tested at 1.5 times Working Load Limit for 20000 cycles. Breakage test. 100% magnaflux crack detection. Surface finish: Powder plastified. Colour code:Red RAL3020/Yellow RAL1003
$0
$0
Forged super alloy steel - Quenched and Tempered. Breakage test. 100% Magnaflux Crack Detection. Surface finish: Power plastified Colour: Yellow or Red RALcode: RAL1003 or RAL3020.
$0
$0
CHAINS
$0
$0
$0
$0
LOAD BINDERS
According to EN12195-3 standard. Handle:forged. Suitable for G100 chain. Not for lifting,only for lashing. With G100 eye grab hook with safety pin. Surface finish: Power plastifited Colour code: Blue RAL5015
$0
$0
Min Order: 100pcs Sales Models: Wholesale Colour code Blue RAL5015
$0
$0
According to EN12195-3 standard. Handle:forged. Suitable for G100 chain. Not for lifting,only for lashing. Surface finish: Power plastifited Colour code: Blue RAL5015
$0
$0
Fits Chain Sizes:5/16''-3/8'' Take-Up:8 Inches Barrel Length:10 Inches Handle Length:15.5 Inches Screw Diameter:1 Inch Work Load Limit:8800Lbs Proof Load Limit:17600Lbs Weight:12.6Lbs/Each Pcs. Per Box:4Pcs
$0
$0
Working Load Limit: 7,100 lbs. G70 Chain Size: 5/16" or 3/8" G80 Chain Size: 5/16" or 3/8" Handle Length: 13.9" (straight); 9.5" (folded) Take Up: 6"
$0
$0
Ratchet Load Binder for chain sizes 5/16″ - 3/8″ Working Load Limit 8,800 lbs. Proof Load Limit 17,600 lbs. Use with chain size 3/8″ G30, G43, G70, G80 & 5/16″ G100, 5/16″ G120 Meets/exceeds DOT regulations, Military specifications & CVSA guidelines
$0
$0
- Safety, reliable design for easy operation. - No requirement for locking of handle than lever type load binders. - High quality drop forged construction. - Heat treated for extra strength. - Short reach hooks provide optimum take-up. - Each binder individually proof tested.
$0
$0
-Safety, durability designed for all heavy duty transport use.(Take up slack and apply tension to a tie down system) -Drop forged steel, high strength. -Free 360 degree swivel hooks for easier handling. -Heat-treated for extra strength. -Each binder individually proof tested.
$0
$0
According to EN12195-3 standard. Handle: forged Suitable for G80 chain. With G80 eye grab hook with safety pin. Easy functioning.
$0
$0
- Same reliable design as ratchet type load binder. - End fittings for each end to suit your application.
$0
$0
-High quality forged steel. -Spring cushion for load protection, cushions shock and sway. -Binder toggles away from the load. -Each binder individually proof tested.
$0
$0
-High strength transportation load binders. -Free 360 degree swivel hooks for easier handling. -Special handle angle prevents finger trap and allows easy release. -Each binder individually proof tested. -Drop forged, heat treated for extra strength.
$0
$0
Material: Carbon Steel, Alloy Steel Handle: Drop forged, casting. Finish: Painted. Fitting for chain
$0
$0
RATCHET BUCKLES & OVER CENTER BUCKLES
$0
$0
$0
$0
RIGGING HARDWARE
Material: High tensile steel Safety Factor: 5:1 Finish: Painted RAL 5015, RAL 1003 or RAL 3020 Temperature Range: -20℃ up to +200℃ Standard Certification: Certificate of Conformity
$0
$0
Material: High tensile steel Safety Factor: 5:1 Finish: Painted RAL 5015, RAL 1003 or RAL 3020 Temperature Range: -20℃ up to +200℃ Standard Certification: Certificate of Conformity
$0
$0
Material: High tensile steel Safety Factor: 5:1 Finish: Painted RAL 5015, RAL 1003 or RAL 3020 Temperature Range: -20℃ up to +200℃ Standard Certification: Certificate of Conformity
$0
$0
Conforms To Federal Specification FF-T-791b, Type 1, Form 1 - Class 5, and ASTM F-1145, except for those provisions required of the contractor. Material: Forged Steel, bodies are normalized. End Fittings are quenched and tempered. Loading: Proof load is 2.5 times working load limited. Ultimate load is 5 times working load limited. Finished: Hot Dipped Galvanized.
$0
$0
Material: Mild Steel or Cast Steel or Carbon Steel. Made by Forged or Cast, (When asking the inquiry for Din1480, Must be indicated made by forged or casted!!) Finished: Galv. self-color or Hot Dipped Galv. Packing: Gunny bags or Cartons and then on pallets. (customer are available) Please noted: the size of the body is same for the eye and hook, hook and eye, hook and hook. Feature: Two Kinds Made, Cast and Forged. Forged with an advance quantity, Cast with a cheaper price Advantage: widely used, easy handling for tightening. Benefit: Save working time, correct tool give your correct
$0
$0
Material: High Carton Steel Finished: Forged and then Hot Dipped Galv. (self-color or e-galv. are acceptable) Packing: Cartons or Gunny Bags and then on Pallets. Feature: High Carbon Steel Forged. Top Quality. Advantage: High Tensile Strength Benefit: Easy Handling.
$0
$0
Snap hook Carbine hooks,DIN5299C, zinc plated Packing: cartons Material: mild steel
$0
$0
Snap hook or Carbine hooks, with eyelet and screw, zinc plated Packing: cartons Material: mild steel
$0
$0
Finished: Electric Galv. or Nickel Plated. Material: mild steel Packing: Cartons
$0
$0
Galvanized Eye Nuts DIN 582- Ring Nut Lifting Points. Material: Forged steel annealed, C1015, Contact face machined Finished: All types can be supplied zinc coated by electrolytic process. Packing: Cartons or gunny bags then on pallets. Operative Range: Rope Industry, Chain industry, stretching and lifting instruments, carne manufacturing, iron furniture and protection equipment.
$0
$0
Galvanized Eye Bolts DIN 580 - Eye Screw Lifting Points. Material: Forged steel annealed, C1015, Contact face machined Finished: All types can be supplied zinc coated by electrolytic process. Packing: Cartons or gunny bags then on pallets. Operative Range: Rope Industry, Chain industry, stretching and lifting instruments, carne manufacturing, iron furniture and protection equipment.
$0
$0
Sales Models: Wholesale Min Order: 1000pcs Ultimate load is 4 times the Working Load Limit.
$0
$0
Sales Models: Wholesale Min Order: 1000pcs Ultimate load is 4 times the Working Load Limit.
$0
$0
Available in carbon steel and alloy steel. Forged-Quenched and tempered. Ultimate load is 5 times the Working Load Limit.
$0
$0
Forged alloy steel - Quenched and Tempered. Ultimate load is 6 times the Working Load Limit.
$0
$0
Packing: cartons Material: mild steel Finish: Electric- galvanized Zinc Plated Nickel Plated
$0
$0
DIELECTRIC QUICK BUCKLES / ROPE SNAP HOOKS / D RINGS
$0
$0
‧Material: High Tensile Steel Alloy ‧Minimum Breaking Strength: 22.3kN / 5000LBS ‧Weight: 48 g ‧Finish: Nickel-chromed, White / Yellow Zinc ‧Webbing: 45 mm ‧Width: 57 mm ‧Length: 38 mm 4.5mm Thick
$0
$0
MARINE HARDWARE
Stud / Studless Link Anchor Chain Grade: U2/U3 Diameter: 16mm to 152mm, 5/8 - 6 inch ABS, LR, BV, NK, GL, DNV, RS,CCS Certificate
$0
$0
1. Type: Mooring Chain 2. Diameter:34mm to 152mm, 1-3/8 - 6 inch 3. Grade: R3,R3S, R4, R4S, R5 4. ABS, LR, BV, NK, GL, DNV, KR, IRS, RS,CCS Certificate 5. Application: offshore oil platform, offshore oil storage ship, offshore buoys and other other ocean development facilities
$0
$0
STAINLESS STEEL & ALUMINUM ALLOY PRODUCTS
Stainless Steel AISI304 Stainless Steel AISI316 Steel Electric Galvanized Steel Self Color
$0
$0
Stainless Steel AISI316 Stainless Steel AISI304
$0
$0
Stainless Steel AISI316 Stainless Steel AISI304 Steel Electric Galvanized
$0
$0
Stainless Steel AISI304 Stainless Steel AISI316 Steel Electric Galvanized
$0
$0
Stainless Steel AISI304 Stainless Steel AISI316 Steel Electric Galvanized
$0
$0
Stainless Steel AISI316 Stainless Steel AISI304 Steel Electric Galavanized
$0
$0
Stainless Steel AISI316 Stainless Steel AISI304 Steel Electric Galavanized
$0
$0
Stainless Steel AISI316 Stainless Steel AISI304
$0
$0
WIRE ROPE & ACCESSORIES
Material: Steel Forged. Finish: E-Galv. or Hot Dipped Galv. Packing: In Cartons And then on Pallets.
$0
$0
Galv. Malleable Wire Rope Clip Din 1142 Material: Body with malleable cast, Heavy duty Type, U-BOLT with mild steel. Finished: Galv. Packing: Gunny Bags and then on pallets. Minimum order quantity: 200pcs for one size.
$0
$0
$0
$0
Material: High Tensile Steel Surface Finished: Zinc Plated, Hot Dip Galvanized, Powder Coated or others. For steel wire rope
$0
$0
Stainless Tubular-Tube Thimble without Gusset, please noted that there is no welded plate at the end. Material: Stainless steel tube, aisi304 or aisi316. Finished: polished. Packing: in cartons and then on pallets. Use for anchor wraps and permanent morning wraps--helps protect the rope eye from chaffe--keep rope well located on thimble.
$0
$0
Technical Notes: to BS 464 – Table 1 – 1958 Material: Super Carbon Steel Finish: Hot Dipped Galvanized Note: NOT FOR LIFTING PURPOSES
$0
$0
The Heavy Duty Thimble DG-414 meet the performance requirements of Federal Specification FF-T-276b Type III, Material and Process: Hot dip galvanized steel. The standard choice for heavy duty applications and loading conditions Available in Hot Dip galvanized or Stainless Steel (Type 304 OR AISI316), Stainless Steel Heavy Duty Thimble DG-414. Stainless steel recommended for more corrosive environments where greater protection is required. Greater protection against wear and deformation of the wire rope eye. Longer service life.
$0
$0
NEWS AND EVENTS
- DAWSON WLL300t WIDE BODY SHACKLES X DAWSON WLL 300t HMPE ROUND SLINGS PROOF LOAD TEST FOR DNV INSPECTION2025-04-14
- DAWSON Forged Alloy Steel Heavy Duty Hawser Shackle with Double Nuts for Mooring Hawser or Chafe Chain2025-03-24
- DAWSON™ BLUESNAKE™ HD Turnbuckles, Heavy Duty Lashing Turnbuckles with Jaw & Jaw, Eye & Eye, Eye & Jaw2025-02-24
