DS-KNMK / DS-KNMKA Non-Marking Vertical Clamps, Non Marring Plate Lifting Clamp
Product Description
DS-KNMK / DS-KNMKA Non-Marking Vertical Clamps, Vertical Lifting Clamp for Transporting Stainless, Steel, Aluminum, Wood, Non Marring Plate Lifting Clamp
- Dawson Group Ltd. - China Manufacturer, Supplier, Factory
Working Load Limit(WLL) 0.5-5T
DS-KNMK / DS-KNMKA is a Non-marking clamp with 2 special synthetic pads.The Clamp can be used for lifting, handling and transporting stainless, steel, aluminum, copper, wood and marble from all positions(vertical and horizontal) and will not leave any marks.
The clamp is locked in closed as well as in open position.
Manufactured from high quality carbon steel.
| Model | WLL(Tons) | Test Load(T) | Jaw Opening(mm) | Weight(kg) | U | V | W | X | S | T | H | Z |
| DS-KNMK0.5 | 0.5 | 0.75 | 0-20 | 4.55 | 466 | 174 | 47 | 48 | 94 | 65 | 191 | 80 |
| DS-KNMKA0.5 | 0.5 | 0.75 | 0-180 | 10 | / | / | / | / | / | / | / | / |
| DS-KNMK1 | 1 | 1.5 | 0-30 | 6.75 | 485 | 227 | 48 | 54 | 95 | 65 | 215 | 80 |
| DS-KNMK2 | 2 | 3 | 0-50 | 13.35 | 580 | 280 | 63 | 66 | 120 | 76 | 270 | 90 |
| DS-KNMK3 | 3 | 4.5 | 0-60 | 16.7 | 643 | 286 | 63 | 70 | 120 | 85 | 270 | 90 |
| DS-KNMK5 | 5 | 7.5 | 0-60 | 19.8 | 770 | 289 | 63 | 74 | 120 | 105 | 280 | 90 |
Welcome to buy the newest and cheap DAWSON DS-KNMK / DS-KNMKA Non-Marking Vertical Clamps, Vertical Lifting Clamp from our factory. We're one of the leading China manufacturers and suppliers, offering you the wholesale service and the OEM service at a discount. With CE certification, our products made in China in stock are high in quality and low in price. Please be free to get the free sample from us.
INSTRUCTIONS FOR THE SAFE USE OF PLATE CLAMPS
SAFE HANDLING OF PLATE CLAMP
PLATE CLAMP used for different applications should be stored in separate places.
PLATE CLAMP should always be stored indoors, and never left exposed to other elements.
It will be more convenient if you put colored markings or a specific number on each clamp according to its lifting capacity so that you can easily use the correct clamp for the weight.
Once a week, the clamps should be inspected by the person in charge of storage,according to the specified inspection standards. Be sure to have the manufacturer perform an inspection once every two or three months.
When damage of the clamps, such as cracks or wear on the welded section, is found, stop using them immediately regardless of the apparent size or extent of the damage.
a) operating condition
b) wear on cam or swivel jaw
c) condition of the opening
Clamps which you have stopped using for safety reasons should be clearly marked as defective and stored separately. They should never be left in the work area.
Be sure to record inspections in log every time they are performed.
Product Show:
Other Related Products:
Hot Tags: plate clamp,lifting plate clamp,non-marking lifting clamp,non-marking vertical clamp,vertical lifting clamp, non-marking lifting clamps, plate lifting clamps, vertical clamp for handling, plate clamp for transporting stainless, plate clamp for transporting wood, plate clamp for transporting copper, plate clamp for transporting steel, Non Marring Plate Lifting Clamp
WARNING
·Make sure of the condition of the load to be lifted.
·Be sure to stay clear of the swinging range of objects being lifted.
·Use clamps with adequate specifications (both lifting capacity and opening)
·Observe proper operating procedures.
·Use the right clamps
·Use tow vertical lifting clamps to lift one steel plate.
For further information, please contact us. Email:info@dawson-group.com
Factory & Package Show: