Pressing Process of Wire Rope Crimping Machine

Pressing machine is also called wire rope press, it is a wire rope rigging processing equipment. With the continuous progress of the industry technology, the application of the market demand for the quality and performance of wire rope sleeve press is also getting higher and higher. A large part of the high quality and high performance wire rope press machine depends on the technological process of the equipment. When pressing wire rope sleeve press, different die and consolidation pipe should be selected according to different rope diameters. The die should be fixed well and lubricant should be applied on the die to facilitate the starting of the die. Then put the steel wire rope into the die cavity and press it vertically. The upper and lower die can be closed completely.

In the suppression process, special attention should be paid to:

1. Align the mold up and down, strictly prohibit dislocation. If the upper and lower die cavity is dislocated, the clamped cable will become a graphical situation, so that the thickness of the fixing pipe is uneven, resulting in stress concentration, and the cable breaks from the thin wall of the fixing pipe in the tensile test.

2. In the process of pressing, the fixed nozzle must be placed correctly, and the fixed nozzle should be placed upright in the cavity of the die, not inclined or flat.

3. According to the diameter of the wire rope, choose the corresponding mould and solid nozzle.