Maintenance of DAWSON Steel Wire Rope

Maintenance of DAWSON Steel Wire Rope

1、Maintenance and Inspection of Steel Wire Rope

(1)Operation: In operation, the wire rope should be in steady speed, never overload, and never shock load a wire rope.

(2)Maintenance: Lubricant is applied to the wires and strands of a wire rope when manufactured. This lubricant is depleted when the rope is in service. And various nocuous matters will stick to the surface of the rope. These will cause abrasion between wire rope and the block, and rusting of the rope. It is important to clean and replace lubricant to the wire rope periodically.

(3)Record of inspection: Wire rope should be inspected regularly, and all the records should be kept carefully. Other than cleaning and adding lubricant, the inspection should include checking the following: abrasion of wire rope, condition of broken wires. And corrosion. Also check the condition of metal parts such as pulley groove, loading ring, hook, etc. Pay special attention and check for external and internal broken wires in the end of wire rope, and the section of wire rope that passes through pulley blocks and drums.

Products Show: