MT T99-1997 Standard 30-38mm Flat Plate Pin Chain Links for Mining Chains
Product Description
MT T99-1997 Standard 30-38mm Flat Plate Pin Chain Links for Mining Chains
- Dawson Group Ltd. - China Manufacturer, Supplier, Factory
Unit:mm
| Size | d | P | L | b | B | C | Breaking Load | Fatigue intensity | Weight |
| dxp | max | min | max | max | KN | Cycles | KG | ||
| 30×108 | 30±0.8 | 108±1.1 | 171 | 32 | 111 | 37 | 1000 | 40000 | 2.6 |
| 34×126 | 34±1.0 | 126±1.3 | 196 | 36 | 121 | 41 | 1290 | 40000 | 4.2 |
| 38×137 | 38±11 | 137±1.4 | 213 | 40 | 134 | 46 | 1610 | 40000 | 5.1 |
Product specifications:
30×108MM Flat Plate Pin Chain Links, 34×126MM Flat Plate Pin Chain Links, 38×137MM Flat Plate Pin Chain Links
Flat plate and pin links are used to connect vertical or horizontal mining ring chains. The special fastening structure makes plate and pin links easier to install and perform better than DIN standards.
According to MT/T99-1997 standard and DAWSON enterprise standard
Used to connect vertical or horizontal mine ring chain, can also be used for scraper conveyor and plough connection, can be used as a flat ring or vertical ring.
● Ensure that the mounting surface and locking surface are clean
● Check regularly for wear and damage
● Insert the two half rings into the chain and connect them, and drive the middle fixing pin to prevent loose
● Every three months or complete 1 million tons of coal inspection
● It is not allowed to insert other accessories in the two connecting links
Products Show:
Hot tags: mining chain connectors,flat plate pin chain links,mining chain connecting links,flat plate pin chain links for mining chains,flat plate pin chain links for mining chain,MT/T99-1997 flat plate pin chain links
Other Related Products Show:
DIN 22258-1 Standard 26×92 Mining Chain Connectors - Flat Type Connector(SL) | DIN 22258-1 Standard 30×108 Mining Chain Connectors - Flat Type Connector(SL) | DIN 22258-1 Standard 34×126 Mining Chain Connectors - Flat Type Connector(SL) |
Installation process:
The assembly of Flat Type Connector (SL) is as shown above illustrations.
As an important accessory of scraper and slag extractor in coal mine, the connector has large cyclic bearing capacity and high utilization rate; In the process of operation, it bears tensile force, friction with chain, coal block and sprocket, and is eroded by mineral water.
The DAWSON mining chain link connectors with reasonable geometric size, through rough machining, semi finishing, finishing, heat treatment, pre stretching, shot blasting and other processes, has high strength, high toughness, wear resistance, corrosion resistance, good cold bending ability, high breaking force and other comprehensive mechanical properties.
DAWSON Mining Chain Connectors Catalogue Download:
Factory & Package Show: