Large Diameter Cable-Laid Slings

Product Description

Large Diameter Cable-Laid Slings 
- Dawson Group Ltd. - China Manufacturer, Supplier, Factory

      
Nominal dia. d(mm) Main Rope dia.(mm) Core Rope dia.(mm) Breaking Load Working load limit Approx. weight
(KN) (t) (KN) (t) (kg/m)
70 22 26 1460 149 304 31 15.62
76 24 28 1736 177 373 38 18.54
82 26 30 2039 208 451 46 21.67
90 28 34 2363 240 539 55 25.61
96 30 36 2713 277 647 66 29.24
102 32 38 3089 315 756 77 33.15
108 34 40 3486 355 882 90 37.28
114 36 42 3905 398 1022 104 41.69
120 38 44 4363 445 1182 120 46.32
126 40 46 4838 493 1360 139 51.18
132 42 48 5314 542 1551 158 56.27
144 46 52 6394 652 2022 206 67.24
150 48 54 6955 709 2295 234 73.13
156 50 56 7517 767 2506 256 78.90
162 52 58 8165 833 2722 278 85.59
168 54 60 8770 894 2923 298 92.17
174 56 62 9461 965 3154 322 98.96
180 58 64 10152 1035 3384 345 106.28
192 62 68 11578 1181 3859 394 121.12
204 66 72 13133 1339 4378 446 136.79
216 68 80 13954 1423 4651 474 149.00
228 74 80 16502 1683 5500 560 171.59
240 76 88 17410 1775 5803 592 184.97
252 80 92 19310 1969 6437 656 205.03
264 84 96 21254 2167 7085 722 225.20
276 88 100 23328 2379 7776 793 246.83
288 90 108 24408 2489 8136 830 265.53
300 96 108 26525 2705 8842 902 294.38
312 100 112 28771 2934 9591 978 319.14
336 108 120 32616 3326 10866 1108 383.31
360 116 128 37627 3837 12542 1280 441.30
384 124 136 42984 4383 14328 1460 503.59
408 130 148 47088 4802 15696 1600 560.43
432 138 156 53136 5418 17712 1806 629.93
456 146 164 56592 5771 18864 1924 705.58
NOTE:
1.Steel wire ropes with diameters from 67mm to 456mm are 6x36WS+IWR, 6x65WS+IWR types complying to the GB/T20118 and GB/T20067 standards.
2.Large diameter steel cable twisting joint riggings are manufactured according to the EN13414 standard, and the safety factor should be selected according to the EN13414 standard.
Wire Rope Sling Application
Hitches
1. Vertical- The Vertical, or straight, attachment is simply using a sling to connect a lifting hook or other device to a load. Full rated load of the sling may be used, but never exceeded. A tagline should be used on such a lift to prevent rotation, which can damage the sling. A wire rope sling with a hand-tucked splice can unlay and fail if the sling is allowed to rotate.
2. Choker- Choker Hitch configurations reduce the rated capacity of a sling by 20 to 25 percent. If a load is hanging free, the normal choke angle is approximately 135°. When the choke angle is less than 120°, an adjustment in the choker rated capacity must be made(see illustration below). Extreme care should be taken to determine the choke angel as accurately as possible. As indicated in the table below, the decrease in rated capacity is dramatic.

 
   Choker Hitch
RATED CAPACITY ADJUSTIMENT
Choke  IWRC and Fiber Core Rope
Angle       Percent of
(Degrees)    Choker Rated Capacity
Over 120        100
  90-120          87
  60-89            74
  30-59            62
Up to 29         49

Angle Adjustment
Rated capacity adjustment for slings in choker hitch when angle is less than 120°. Choke angles greater than 135° are unstable and should not be used.
 
3. Basket- Basket hitched distribute a load equally between the two legs of a sling, within limitations imposed by the angles at which legs are rigged to the load(see discussion of sling angles).
Basket Hitch
CAPACITY ADJUSTMENT
    Angle                      Percent of Single Leg
(Degrees)                          Capacity
       90                                     200
       60                                     170
       45                                     140
       30                                     100


 
Angle
A basket hitch has twice the capacity of a sling leg only if legs of sling are vertical, and only if D/d ratio is 25:1 and it is vertical. D/d>25:1 per ANSI B30.9.
WARNING: Do not use, or allow the use of the products in this catalogue, unless the user has read and understands the applicable instructions and product warnings. Information available upon request.
Reeving
Revving through connections to load increases load on connections fitting by as much as twice.
Do not reeve.


 
Triple and Quad Leg Slings
Triple leg slings have 50% more capacity than double leg only if the center of gravity is in center of connection points and the legs are adjusted properly(equal share of the load)
Quad leg slings offer improved stability but do not provide increased lifting capacity.
Center of Gravity(COG)
The location of the center of gravity to the pick points is an important consideration.

COG and Sling Loading
When lifting vertically, the load will be shared equally if the center of gravity is spaced equally between the pick points, as in the first illustration at right. If the weight of the load is 10,000 lbs., then each sling will have a load of 5,000 lbs. and each shackle and eyebolt will also have a load of 5,000 lbs.
When the center of gravity is not equally spaced between the pick points, as in the second illustration, the slings and fittings will not carry an equal share of the load. The sling connected to the pick point closest to the center of gravity will carry the greatest share of the load. Sling 2 is closest to COG. It will have the greatest share of load.
Sling 2 = 10,000 × 8 /(8+2)= 8,000
Sling 1 = 10,000 × 2 /(8+2)= 2,000

WARNING: Do not use, or allow the use of the products in the catalogue, unless the user has read and understands the applicable instructions and product warnings. Information available upon request.
Sling Angle
Sling angle (also called angle of loading) is the angle measured between a horizontal plane and the sling leg or body. This angle is very important and can have a dramatic effect on the rated capacity of the sling (see illustration below) . As illustrated at right, when this angle decreases, the load on each leg increases. This principle applies whether one sling is used to pull at an angle, in a basket hitch, or for multilegged bridge slings. Sling angles of less than 30° shall not be used.

Angles and Load
   
Angles and Stress
How do you carry two buckets of water? These illustrations typify the stresses imposed on slings when the legs are attached to the load at various angles.
             Load Angle Factor
Sling Angle                   Load Angle
Degrees(A°)                 Factor =L/H
   90                              1.00
   60                             1.155
   50                             1.305
   45                             1.414
   30                             2.00
 LOAD ON EACH LEG OF SLING=
(Load/2)×LOAD ANGLE FACTOR
ANSI B30.9 recommends against the use of a horizontal sling angle smaller than 30°.
      
WARNING: Do not use, or allow the use of the products in the catalogue, unless the user has read and understands the applicable instructions and product warnings. Information available upon request.

 


Other related products:















Wire Rope Breaking Testing Machine:





Application of Steel Wire Rope:


Steel Wire Rope Catalogue Download:

Factory & Package Show:








Product Inquiry

Steel Wire Rope

Hoist Chain

Hoist Chain Working Load Limits

Wire Rope Grips, Single Eye Cable Socks Type A

Wire Rope Grips, Double Eye Cable Socks Type B