High Quality Prestress Steel Wire, Smooth Steel Wire, Helical Rib Wire, Indented Steel Wire
Product Description
High Quality Prestress Steel Wire, Smooth Steel Wire, Helical Rib Wire, Indented Steel Wire
-Dawson Group Ltd. - China Manufacturer, Supplier, Factory
Mechanical Properties of Stress- eliminating Plan and Helical Rib Wire
Standard GB/T 5223-2014
Nominal diameter dn/mm | Nominal tensile strength Rm/Mpa | Eigenvalue of maximum force Fm/kN | The maximum value of maximum force Fm.max/kN | 0.2%Yield force Fp0.2/kN ≥ | Maximum force total elongation (L0=200mm) Agt/%≥ | Repeated bending performance | Stress relaxation performance | ||
Number of bends/ (次/180°) | Bending radius R/mm | The initial force is equivalent to the actual maximum percentage /% | 1000hStress relaxation rate r/%≤ | ||||||
4.00 | 1470 | 18.48 | 20.99 | 16.22 | 3.5 | 3 | 10 | 70 80 | 2.5 4.5 |
4.80 | 26.61 | 30.23 | 23.35 | 4 | 15 | ||||
5.00 | 28.86 | 32.78 | 25.32 | 4 | 15 | ||||
6.00 | 41.56 | 47.21 | 36.47 | 4 | 15 | ||||
6.25 | 45.10 | 51.24 | 39.58 | 4 | 20 | ||||
7.00 | 56.57 | 64.26 | 49.64 | 4 | 20 | ||||
7.50 | 64.94 | 73.78 | 56.99 | 4 | 20 | ||||
8.00 | 73.88 | 83.93 | 64.84 | 4 | 20 | ||||
9.00 | 93.52 | 106.25 | 82.07 | 4 | 25 | ||||
9.50 | 104.19 | 118.37 | 91.44 | 4 | 25 | ||||
10.00 | 115.45 | 131.16 | 101.32 | 4 | 25 | ||||
11.00 | 139.69 | 158.70 | 122.59 | - | - | ||||
12.00 | 166.26 | 188.88 | 145.90 | - | - | ||||
4.00 | 1570 | 19.73 | 22.24 | 17.37 | 3 | 10 | |||
4.80 | 28.41 | 32.03 | 25.00 | 4 | 15 | ||||
5.00 | 30.82 | 34.75 | 27.12 | 4 | 15 | ||||
6.00 | 44.38 | 50.03 | 39.06 | 4 | 15 | ||||
6.25 | 48.17 | 54.31 | 42.39 | 4 | 20 | ||||
7.00 | 60.41 | 68.11 | 53.16 | 4 | 20 | ||||
7.50 | 69.36 | 78.20 | 61.04 | 4 | 20 | ||||
8.00 | 78.91 | 88.96 | 69.44 | 4 | 20 | ||||
9.00 | 99.88 | 112.60 | 87.89 | 4 | 25 | ||||
9.50 | 111.28 | 125.46 | 97.93 | 4 | 25 | ||||
10.00 | 123.31 | 139.02 | 108.51 | 4 | 25 | ||||
11.00 | 149.20 | 168.21 | 131.30 | - | - | ||||
12.00 | 177.57 | 200.19 | 156.26 | - | - | ||||
4.00 | 1670 | 20.99 | 23.50 | 18.47 | 3 | 10 | |||
5.00 | 32.78 | 36.71 | 28.85 | 4 | 15 | ||||
6.00 | 47.21 | 52.86 | 41.54 | 4 | 15 | ||||
6.25 | 51.24 | 57.38 | 45.09 | 4 | 20 | ||||
7.00 | 64.26 | 71.96 | 56.55 | 4 | 20 | ||||
7.50 | 73.78 | 82.62 | 64.93 | 4 | 20 | ||||
8.00 | 83.93 | 93.98 | 73.86 | 4 | 20 | ||||
9.00 | 106.25 | 118.97 | 93.50 | 4 | 25 | ||||
4.00 | 1770 | 22.25 | 24.76 | 19.58 | 3 | 10 | |||
5.00 | 34.75 | 38.68 | 30.58 | 4 | 15 | ||||
6.00 | 50.04 | 55.69 | 44.03 | 4 | 15 | ||||
7.00 | 68.11 | 75.81 | 59.94 | 4 | 20 | ||||
7.50 | 78.20 | 87.04 | 68.81 | 4 | 20 | ||||
4.00 | 1860 | 23.38 | 25.89 | 20.57 | 3 | 10 | |||
5.00 | 36.51 | 40.44 | 32.13 | 4 | 15 | ||||
6.00 | 52.58 | 58.23 | 46.27 | 4 | 15 | ||||
7.00 | 71.57 | 79.27 | 62.98 | 4 | 20 |
Dimension and Tolerance of Helical Rib wire
GB/T 5223-2014
Nominal diameter dn/mm | Number of spiral ribs/piece | Base circle size | Outer outline size | Single rib size | Spiral rib lead C/mm | ||
Base circle diameter D1/mm | Allowable deviation/mm | Outer outline diameter D/mm | Allowable deviation/mm | Width a/mm | |||
4.00 | 4 | 3.85 | ±0.05 | 4.25 | ±0.05 | 0.90-1.30 | 24-30 |
4.80 | 4 | 4.60 | 5.10 | 1.30-1.70 | 28-36 | ||
5.00 | 4 | 4.80 | 5.30 | ||||
6.00 | 4 | 5.80 | 6.30 | 1.60-2.00 | 30-38 | ||
6.25 | 4 | 6.00 | 6.70 | 30-40 | |||
7.00 | 4 | 6.73 | 7.46 | ±0.10 | 1.80-2.20 | 35-45 | |
7.50 | 4 | 7.26 | 7.96 | 1.90-2.30 | 36-46 | ||
8.00 | 4 | 7.75 | 8.45 | 2.00-2.40 | 40-50 | ||
9.00 | 4 | 8.75 | 9.45 | 2.10-2.70 | 45-52 | ||
9.50 | 4 | 9.30 | 10.10 | 2.20-2.80 | 44-53 | ||
10.00 | 4 | 9.75 | 10.45 | 2.50-3.00 | 45-58 | ||
11.00 | 4 | 10.76 | 11.47 | 2.60-3.10 | 50-54 | ||
12.00 | 4 | 11.78 | 12.50 | 2.70-3.20 | 55-70 |
Dimension and Tolerance of Plain steel Wire, Theoretical weight Per Meter
GB/T 5223-2014
Nominal diameter dn/mm | Allowable deviation of diameter/mm | Nominal cross-sectional area Sn/mm⊃2; | Theoretical weight per meter g/m |
4.00 | ±0.04 | 12.57 | 98.6 |
4.80 | 18.10 | 142 | |
5.00 | ±0.05 | 19.63 | 154 |
6.00 | 28.27 | 222 | |
6.25 | 30.68 | 241 | |
7.00 | 38.48 | 302 | |
7.50 | 44.18 | 347 | |
8.00 | ±0.06 | 50.26 | 394 |
9.00 | 63.62 | 499 | |
9.50 | 70.88 | 556 | |
10.00 | 78.54 | 616 | |
11.00 | 95.03 | 746 | |
12.00 | 113.1 | 888 |
Dimension and Tolerance of Helical Rib Wire
GB/T 5223-2014
Nominal diameter dn/mm | Notch depth | Notch length | Pitch | |||
Nominal depth a/mm | Allowable deviation/mm | Nominal length b/mm | Allowable deviation /mm | Nominal pitch L/mm | Allowable deviation/mm | |
≤5.00 | 0.12 | ±0.05 | 3.5 | ±0.05 | 5.5 | ±0.05 |
>5.00 | 0.15 | 5.0 | 8.0 |
Mechanical Properties of Cold Drawn steel Wire for Pressure Pipe
GB/T 5223-2014
Nominal diameter dn/mm | Nominal tensile strength Rm/Mpa | Eigenvalue of maximum force Fm/kN | The maximum value of maximum force Fm2.max/kN | 0.2%Yield force Fp0.2/KN ≥ | The number of twists per 210mm torque N ≥ | rate of reduction in area Z/% ≥ | When the hydrogen embrittlement sensitivity load is 70% of the maximum force, the breaking time t/h≥ | Stress relaxation performance When the initial force is 70%, 1000h stress relaxation rate r/%≥ |
4.00 | 1470 | 18.48 | 20.99 | 13.86 | 10 | 35 | 75 | 7.5 |
5.00 | 28.86 | 32.79 | 21.65 | 10 | 35 | |||
6.00 | 41.56 | 47.21 | 31.17 | 8 | 30 | |||
7.00 | 56.57 | 64.27 | 42.42 | 8 | 30 | |||
8.00 | 73.88 | 83.93 | 55.41 | 7 | 30 | |||
4.00 | 1570 | 19.73 | 22.24 | 14.80 | 10 | 35 | ||
5.00 | 30.82 | 34.75 | 23.11 | 10 | 35 | |||
6.00 | 44.38 | 50.03 | 33.29 | 8 | 30 | |||
7.00 | 60.41 | 68.11 | 45.31 | 8 | 30 | |||
8.00 | 78.91 | 88.96 | 59.18 | 7 | 30 | |||
4.00 | 1670 | 20.99 | 23.50 | 15.74 | 10 | 35 | ||
5.00 | 32.78 | 36.71 | 24.59 | 10 | 35 | |||
6.00 | 47.21 | 52.86 | 35.41 | 8 | 30 | |||
7.00 | 64.26 | 71.96 | 48.20 | 8 | 30 | |||
8.00 | 83.93 | 93.99 | 62.95 | 6 | 30 | |||
4.00 | 1770 | 22.25 | 24.76 | 16.69 | 10 | 35 | ||
5.00 | 34.75 | 36.68 | 26.06 | 10 | 35 | |||
6.00 | 50.04 | 55.69 | 37.53 | 8 | 30 | |||
7.00 | 68.11 | 75.81 | 51.08 | 6 | 30 |
Dimensions and Properties of Cold-Drawn Wire
BS5896-1980
Nominal diameter (*1) (mm) | Nominal tensile strength (*1、*3) (mm) | Conditional yield stress of 0.1% of nominal (*2、*3) (MPa) | Nominal cross-sectional area(*2) (mm⊃2;) | Nominal mass (g/m) | Allowable deviation | Specified characteristic fracture load(*6、*7) (mm) | Prescribed characteristic 0.1% conditional yield load(*4、*6、*7) (kN) | Load at 1% elongation(*4、*6、*7) (kN) | Minimum elongation under maximum load L0≥200mm | Ductility test | Relaxation | ||||||
Diameter (mm) | Cross-sectional area(mm⊃2;) | quality(g/m) | Contraction when pulled off | Number of repeated bending | Initial load(Percentage of actual breaking load) | 1000h maximum relaxation | |||||||||||
Minimum times | Bending radius(mm) | Level 1 relaxation | Level 21 relaxation | ||||||||||||||
7 7 | 1570 1670 | 1300 1390 | 38.5 | 302 | ±0.05 | ±0.55 | ±4.3 | 60.4 64.3 | 50.1 53.4 | 51.3 54.7 | For all wires3.5% | For all steel wires: ductile fractures visible to the naked eye | Light round steel wire 4 Indentation steel wire 3 | 20 | For all wires 60% 70% 80% | For all wires 4.5% 8% 12% | For all wires1.0% 2.5% 4.5% |
6 6 | 1670 1770 | 1390 1470 | 28.3 | 222 | ±0.05 | ±0.47 | ±3.7 | 47.3 50.1 | 39.3 41.6 | 40.2 42.6 | 15 | ||||||
5 5 | 1670 1770 | 1390 1470 | 19.6 | 154 | ±0.05 | ±0.39 | ±3.1 | 32.7 34.7 | 27.2 28.8 | 21.8 29.5 | 15 | ||||||
4.5 | 1620 | 1350 | 15.9 | 125 | ±0.05 | ±0.35 | ±2.7 | 25.8 | 21.4 | 21.9 | 15 | ||||||
4 4 | 1670 1770 | 1390 1470 | 12.6 | 98.9 | ±0.04 | ±0.25 | ±2.0 | 21.0 22.3 | 17.5 18.5 | 17.9 19.0 | 10 |
Note: *1. The nominal diameter and nominal tensile strength of the steel wire only indicate the steel wire grade.
*2. The nominal 0.1% conditional yield stress, nominal cross-sectional area and nominal mass are for reference only.
*3. The nominal tensile strength is calculated based on the nominal, area, and specified characteristic breaking load.
*4. The conditional yield load of 0.1% of the specified characteristic is approximately 83% of the specified characteristic fracture load. After negotiation between the supplier and the buyer, the characteristic load at 1% elongation can also be specified, which can be about 85% of the specified characteristic breaking load.
*5. Unless specified by the manufacturer, the modulus of elasticity is 205+10GPa.
*6. The maximum deviation of standard bricks is; tensile strength: 55MPa, or converted into load value; 0.1% yield stress: 66MPa, or converted into load value.
*7. In order to limit the deviation of diameter and area, the specified characteristic load is better than the specified stress.
Advanced Production Lines for Prestressed Steel Wire:
High Quality Raw Materials:
Prestressed Steel Wire
Smooth Steel Wire, Helical Rib Wire, Indented Steel Wire
Steel Wire Inventory:
Packed Steel Wire for Export:
Export Steel Wire Loading:
High Carbon Steel Wire:
Focus on High Carbon Wire Processing
High carbon steel wire specifications from 0.8-13mm. It is characterized by low plasticity, strong elasticity and strong stress resistance. The material can be customized according to customer needs.
Main material: 45# 60# 65# 70# 80# 72B 82B 65Mn 60Si2MnA 55SiCrA,etc.
Products cover: spring steel wire, mattress steel wire, mesh steel wire, cut steel wire, snake spring wire, car seat bracket steel wire, umbrella steel wire, industrial steel wire, high carbon steel wire, fence wire, thin wire, threaded wire, steel wire rope, tire wire, etc.
The company has established cooperative relations with major steel mills and is committed to the processing and production of wire rod products.
Low Plasticity, Strong Elastic, Strong Resistance to Stress
Spring Wire、Mattress Wire:
Prestressed Steel Strand:
Prestressed Steel Bar:
Low Carbon Cold Drawn Steel Wire:
Ribbed Steel Bars and Wire Mesh:
A Complete Set of Quality Tester of Steel Wire:
Application:
Application: Widely applied in high speed rail, pipeline, water conservancy, pole, highway, bridge and building
Sleeper Case:
Pressure Pipe Case:
Pole Case:
Floor Case:
Dual-T Plate Case: