German Institute for Standardization (DIN) chain standards
Publish Time: 2016-01-12 Origin: Site
1. The DIN 20097 1968: under the mine plough and chain conveyor belt transmission. Transmission ratio schemes
2. DIN 20637 1997: mine with overhead. The inspection way monorail long chain quarter aerial distant chain
3. DIN 21187 1994: mine, mine shaft load transport safety technical requirements, with chain hoist and inspection
4. DIN 22252 2001: the test of mine belt conveyor and recovery of the equipment the distant chain
5. DIN 22253 1987: chain connect festival. Chain hook assembly. Size. Requirements. Inspection
6. DIN 22255 2001: mine in the flat with continuous conveyor chain flat section
7. DIN 22256 2002: chain conveyor and mining equipment with the sprocket components. Size, requirements and testing
8. DIN 22257 1990: chain scraper conveyor with scraper chain belt. Outside. Size. Requirements. Inspection
9. DIN 22258-1-2002: chain connection machine. Part 1: lie to type connection machine
10. DIN 22258-2-1993: chain fittings. Wedge fittings. Size, requirements, test
11. DIN 22258-3-1993: chain fittings. Flake fittings. Size, requirements, test
12. DIN 32891 1996: the distant chain. Quality level 2, not by the gauge inspection
13. DIN 32895 1992: loading the car and then machine used fertilizer chain link
14. 32896 1992: loading DIN car and then machine used fertilizer chain link
15. DIN 4000-43-1984: pulley, belts, sprocket and chain characteristics form
16. DIN 45675-2-1987: mechanical vibration opponent. The influence of the robot system. Manual chain vibration measurement telefon
17. 5683-1-19 64: not according to the DIN gauge of the sea anchored navigation inspection of chain with the distant (buoy chain)
18. The 5683-2-19 66: sea DIN anchored navigation-with the distant of chain (buoy chain). The hook. Turn day. Turn hook
19. 5684-1-19 84: crane DIN with distant chain. Quality grades with the test gauge tolerance
20. 5684-2-19 84: crane DIN with distant chain. Quality grade 6. The inspection accord with gauges tolerance
21. 5685-1991: DIN long or medium length of the test of the chain without the distant chain
22. The DIN 5686 1999: no quality requirements of the festival chain
23. 5687-1-19 96: the distant DIN chain. Part 1: quality level 5, average tolerance sure that tested
24. 5688-1-19 86: take hook DIN type or ring type terminal accessories level to 5 chain sling
25. The DIN 5698-1-20 01: circular steel flat section. Transmission chain chain. Part 1: level 2. Case hardening
26. The DIN 5699 1994: continuous conveyor chain with U card hoop
27. DIN 64124-1-1998: textile machinery and accessories. All the different cloth steel wire. Part 1: with no pay. The main chain stitch size
28. 64124-3-1998 DIN: textile machinery and accessories. All the different cloth steel wire. Part 3: take pins. Main dimensions into chain
29. 65360 1992: aviation DIN and space. Roller chain. Delivery technical conditions
30. 685-1-19 81: after inspection DIN of the distant chain. The term
31. DIN 685-2-20 01: after inspection of the distant chain. Part 2: safety requirements
32. DIN 685-3-20 01: after inspection of the distant chain. Part 3: test
33. 685-4-20: after inspection DIN of the distant chain. Part 4: for marking, test certificate
34. 691 1980: DIN railway vehicle and highway vehicles with clamping chain
35. 695 1986: take DIN hook or chain type terminal accessories grade 2 chain sling
36. 762-1-19 92: continuous conveyor DIN with after correction and inspection of the chain link is the distance of the 5 d level 2 distant chain
37. The 762-2-19 92: continuous conveyor DIN with after correction and inspection of the chain link is the distance of the 5 d category 3 distant chain
38. The DIN 763 1990: not according to gauge the long distant chain link inspection
39. The 764-1-19 92: continuous conveyor DIN with after correction and inspection of the chain link distance of 3.5 d grade 2 distant chain
40. 764-2-19 92: continuous conveyor DIN with after correction and inspection of the chain link distance of 3.5 grade 3 d distant chain
41. 766 1986: DIN the distant chain. Quality grade 3. The inspection accord with gauges
42. 8150 1984: many DIN board pin shaft chain
43. 8152-1-19 80: lifting chain DIN, light series LL
44. 8152-2-19 80: lifting chain DIN, light series, LL end joint and slot wheel, connection size
2. DIN 20637 1997: mine with overhead. The inspection way monorail long chain quarter aerial distant chain
3. DIN 21187 1994: mine, mine shaft load transport safety technical requirements, with chain hoist and inspection
4. DIN 22252 2001: the test of mine belt conveyor and recovery of the equipment the distant chain
5. DIN 22253 1987: chain connect festival. Chain hook assembly. Size. Requirements. Inspection
6. DIN 22255 2001: mine in the flat with continuous conveyor chain flat section
7. DIN 22256 2002: chain conveyor and mining equipment with the sprocket components. Size, requirements and testing
8. DIN 22257 1990: chain scraper conveyor with scraper chain belt. Outside. Size. Requirements. Inspection
9. DIN 22258-1-2002: chain connection machine. Part 1: lie to type connection machine
10. DIN 22258-2-1993: chain fittings. Wedge fittings. Size, requirements, test
11. DIN 22258-3-1993: chain fittings. Flake fittings. Size, requirements, test
12. DIN 32891 1996: the distant chain. Quality level 2, not by the gauge inspection
13. DIN 32895 1992: loading the car and then machine used fertilizer chain link
14. 32896 1992: loading DIN car and then machine used fertilizer chain link
15. DIN 4000-43-1984: pulley, belts, sprocket and chain characteristics form
16. DIN 45675-2-1987: mechanical vibration opponent. The influence of the robot system. Manual chain vibration measurement telefon
17. 5683-1-19 64: not according to the DIN gauge of the sea anchored navigation inspection of chain with the distant (buoy chain)
18. The 5683-2-19 66: sea DIN anchored navigation-with the distant of chain (buoy chain). The hook. Turn day. Turn hook
19. 5684-1-19 84: crane DIN with distant chain. Quality grades with the test gauge tolerance
20. 5684-2-19 84: crane DIN with distant chain. Quality grade 6. The inspection accord with gauges tolerance
21. 5685-1991: DIN long or medium length of the test of the chain without the distant chain
22. The DIN 5686 1999: no quality requirements of the festival chain
23. 5687-1-19 96: the distant DIN chain. Part 1: quality level 5, average tolerance sure that tested
24. 5688-1-19 86: take hook DIN type or ring type terminal accessories level to 5 chain sling
25. The DIN 5698-1-20 01: circular steel flat section. Transmission chain chain. Part 1: level 2. Case hardening
26. The DIN 5699 1994: continuous conveyor chain with U card hoop
27. DIN 64124-1-1998: textile machinery and accessories. All the different cloth steel wire. Part 1: with no pay. The main chain stitch size
28. 64124-3-1998 DIN: textile machinery and accessories. All the different cloth steel wire. Part 3: take pins. Main dimensions into chain
29. 65360 1992: aviation DIN and space. Roller chain. Delivery technical conditions
30. 685-1-19 81: after inspection DIN of the distant chain. The term
31. DIN 685-2-20 01: after inspection of the distant chain. Part 2: safety requirements
32. DIN 685-3-20 01: after inspection of the distant chain. Part 3: test
33. 685-4-20: after inspection DIN of the distant chain. Part 4: for marking, test certificate
34. 691 1980: DIN railway vehicle and highway vehicles with clamping chain
35. 695 1986: take DIN hook or chain type terminal accessories grade 2 chain sling
36. 762-1-19 92: continuous conveyor DIN with after correction and inspection of the chain link is the distance of the 5 d level 2 distant chain
37. The 762-2-19 92: continuous conveyor DIN with after correction and inspection of the chain link is the distance of the 5 d category 3 distant chain
38. The DIN 763 1990: not according to gauge the long distant chain link inspection
39. The 764-1-19 92: continuous conveyor DIN with after correction and inspection of the chain link distance of 3.5 d grade 2 distant chain
40. 764-2-19 92: continuous conveyor DIN with after correction and inspection of the chain link distance of 3.5 grade 3 d distant chain
41. 766 1986: DIN the distant chain. Quality grade 3. The inspection accord with gauges
42. 8150 1984: many DIN board pin shaft chain
43. 8152-1-19 80: lifting chain DIN, light series LL
44. 8152-2-19 80: lifting chain DIN, light series, LL end joint and slot wheel, connection size