DS-WPC Series Packing Plate for Turn Table, Turntable, Roller Transport Trolleys

Product Description

DS-WPC Series Packing Plate for Turn Table, Turntable, Roller Transport Trolleys

- Dawson Group Ltd. - China Manufacturer, Supplier, Factory

DS-WPC10 DS-WPC40

Packing plate for compensating the difference in height between skates with turntable and the one without turntable.

Model	A(mm)	B(mm)	C(mm)	D(mm)	F(mm)	G(mm)	I(mm)	Net Weight(kg)
DS-WPC10	153	74	37	120	8	88	5	3.7
DS-WPC20	153	86	37	120	8	88	5	3.7
DS-WPC30	175	95	45	130	8	105	5	5.3
DS-WPC40	270	114	61	180	3	165	11	13.8
DS-WPC50	350	128	61	200	3	235	11	18.8

Note: We are sorry that we will not give additional note to the size change in the future.

Roller Transport Trolleys

*All maximum carrying capacity are based for use on a steel surface, which with stands the pressure of the chain-roller, for safety. The carrying capacities in complete are calculated so that 2 transport trolleys could support the full load on uneven surfaces.

*The track surface is important for the safe transportation of the load, not the carrying capacity of the roller transport trolleys are unsuitable.Movement on torment on tarmac and concrete is restricted. In these cases it is recommended to put a steel plate of a minimum of a 10mm thickness underneath.

*Due to the little effort required to overcome the rolling resistance(4-7% of the total load) precautionary measure must be taken for use on inclined surfaces.

Products Show :

Hot tags:packing plate, packing plate for turn table, turn table,turntable,roller transport trolley,roller transport trolleys,transport trolleys,transport trolley,cargo trolleys,transport skates,rotating skates,cargo trolley

Other Related Products:

DAWSON Transport Trolleys Catalogue Download:

Application of Lifting Clamps:

Safety lifting

● The lifting clamps are suitable for lifting and transporting of steel plates with a maximum hardness of 37 HrC (345HB,1166 N/mm⊃2;).

● The lifting clamps are suitable for usage in normal atmospheric conditions, between -40℃ and +100℃

● Never overload a clamp and prevent the jerking of loads.

● When loading always use the whole jaw depth.

● Never lift more than one plate at the same time.

● Always keep your distance during lifting and descending of a load.

● Prevent situations that anybody is under the load.

● Any welding to the clamp is forbidden, this can influence the hardness and toughness of the clamp.

Lifting Clamps
DS-YQC Type Oil Drum Lifter Clamp	DS-TDC Type Steel Oil Drum Clamp for Lift and Transport Drum
DS-SL Type Oil Drum Lifter Clamp for Lifting	DS-YDG Type Girder Stacking Clamp
DS-DFQ Type Turn Clamp	DS-DFM Type Turn Clamp
DS-TK Type Roller Skates	DS-DCQ Type Double Steel Plate Clamp
DS-QWH Non-Indentation Clamp - Lifting Plate Clamp	DS-MT Type Pallet Clamp

Factory & Package Show: