DS-PDL Type Horizontal Plate Clamp
Product Description
DS-PDL Type Horizontal Plate Clamp
- Dawson Group Ltd. - China Manufacturer, Supplier, Factory
Working load limit(WLL)：1.6-3.2T
Use：
● This acts as an additional safety feature specifically for use with thin sheets which may have a tendency to deflect or sag.
● Manufactured from high quality carbon steel.
● Avoid snatch or shock loading.
● The working load limit is the maximum load that the clamp are authorized to support when used in pairs with a lift angle of 60°.In lifting operations the clamps can be used in pairs or multiples.
| Part No. | Model | WLL(tonnes) Per Pair | Jaw Opening(mm) | Weight(kg) |
| DS-0091 | DS-PDL1.6 | 1.6 | 0-45 | 7.5 |
| DS-0092 | DS-PDL3.2 | 3.2 | 0-45 | 10 |
Products Show:
Other Related Products:
Application of Lifting Clamps:
Safety lifting
● The lifting clamps are suitable for lifting and transporting of steel plates with a maximum hardness of 37 HrC (345HB,1166 N/mm²).
● The lifting clamps are suitable for usage in normal atmospheric conditions, between -40℃ and +100℃
● Never overload a clamp and prevent the jerking of loads.
● When loading always use the whole jaw depth.
● Never lift more than one plate at the same time.
● Always keep your distance during lifting and descending of a load.
● Prevent situations that anybody is under the load.
● Any welding to the clamp is forbidden, this can influence the hardness and toughness of the clamp.
Factory & Package Show: