DS-KMD DS-KCD Wire Rope Electric Hoist, Construction Hoist
Product Description
DS-KMD DS-KCD Wire Rope Electric Hoist, Construction Hoist
Electric Wire Rope Hoist, Electric Hoist
- China Manufacturer Supplier, Factory
Features:
DS-KCD / DS-KMD series electric hoist in an improvement electric hoist that it can completely resolved the problem of that the electric hoist reaches the up limited position、guide rope device is embrittlem ent cracking、the wire rope is disorder、the reducer is losing oil、the frequent trouble about electric and so on.
Adopting heavy punch to limited the position, it has simple structure, reliable movement winch can prevent the phenomenon of the electric hoist reaches the limit position that caused by the chock block in gag lever post to slide down、the unreliable movement of the spark out limited position and so many factors.
To prevent the disorder of the guide rope device, also can prevent the phenomenon of the wire rope wind misorder that appeared in the process of going up and going down. It can make sure that under the circumstance lack of hanger hook acting force, the wire rope can pass through the hole in the guide rope device regularly. The guide rope nut use whole to bisection structure, the spring can adjust the degree of tightness automatically, it is endurable.
Technique Parameter
| Model | DS-KCD-1T-KCD-10T | DS-KMD-0.5T-KMD-16T | |||||||||||||||||||||
| N.W.(T) | 0.5 | 1 | 2 | 3 | |||||||||||||||||||
| Lifting height(m) | 6 | 9 | 12 | 6 | 9 | 12 | 18 | 24 | 30 | 6 | 9 | 12 | 18 | 24 | 30 | 6 | 9 | 12 | 18 | 24 | 30 | ||
| Lifting normal speed(slow speed)(m/pm) | 8(0.8) | ||||||||||||||||||||||
| Running speed(m/pm) | 20(30) | ||||||||||||||||||||||
| Wipe rope | Diameter of the rope(mm) | 4.8 | 7.4 | 11 | 13 | ||||||||||||||||||
| Diameter of the line(mm) | 0.22 | 0.34 | 0.5 | 0.6 | |||||||||||||||||||
| Structural style | D-6×37+1 | ||||||||||||||||||||||
| I-beam track model(GB706-65)(m) | 16-28b | 20a-32c | |||||||||||||||||||||
| The minimum radius of O ring track(m) | 1.5 | 1.5 | 2 | 3 | 4 | 2 | 2.5 | 3 | 4 | 2 | 2.5 | 3 | 4 | ||||||||||
| Lifting electric motor | Model | ZD121-4(ZDS10.2/0.28) | ZD122-4(ZDS10.2/1.5) | ZD131-4(ZDS10.2/4.5) | ZD132-4(ZDS10.8/4.5) | ||||||||||||||||||
| Capacity(k/w) | 0.8(0.2/0.8) | 1.5(0.2/1.5) | 3(0.4/3) | 4.5(0.8/4.5) | |||||||||||||||||||
| Rotating speed(r/m) | 1380 | ||||||||||||||||||||||
| phase | 3 | ||||||||||||||||||||||
| Voltage(V) | 380 | ||||||||||||||||||||||
| Current(A) | 2.4(0.72/2.4) | 4.3(0.72/4.3) | 7.6(1.25/7.6) | 11(2.4/11) | |||||||||||||||||||
| Frequency(c/s) | 50 | ||||||||||||||||||||||
| Lifting electric motor | Model | ZDYI11-4 | Bzdyi11-4 | ZDYI12-4 | |||||||||||||||||||
| Capacity(k/w) | 0.2 | 0.4 | |||||||||||||||||||||
| Rotating speed(r/m) | 1380 | ||||||||||||||||||||||
| phase | 3 | ||||||||||||||||||||||
| Voltage(V) | 380 | ||||||||||||||||||||||
| Current(A) | 0.72 | 1.25 | |||||||||||||||||||||
| Frequency(c/s) | 50 | ||||||||||||||||||||||
| Connection times(t/ph) | 120 | ||||||||||||||||||||||
| Work rate(JC%) | 25% | ||||||||||||||||||||||
| Model | DS-KCD-1T-KCD-10T | DS-KMD-0.5T-KMD-16T | ||||||||||||||||||||||||||||||||||||
| N.W.(T) | 5 | 10 | 16 | |||||||||||||||||||||||||||||||||||
| Lifting height(m) | 6 | 9 | 12 | 6 | 9 | 12 | 18 | 24 | 30 | 6 | 9 | 12 | 18 | 24 | 30 | 6 | 9 | 12 | 18 | 24 | 30 | |||||||||||||||||
| Lifting normal speed(slow speed)(m/pm) | 8(0.8) | |||||||||||||||||||||||||||||||||||||
| Running speed(m/pm) | 20(30) | |||||||||||||||||||||||||||||||||||||
| Wipe rope | Diameter of the rope(mm) | 15 | ||||||||||||||||||||||||||||||||||||
| Diameter of the line(mm) | 0.7 | 0.5 | ||||||||||||||||||||||||||||||||||||
| Structural style | D-6×37+1 | |||||||||||||||||||||||||||||||||||||
| I-beam track model(GB706-65)(m) | 25a-63c | 20a-32c | ||||||||||||||||||||||||||||||||||||
| The minimum radius of O ring track(m) | 2.5 | 3 | 4 | 5 | 2.5 | 3.5 | 4 | 6 | 7.5 | 9 | 2.5 | 3.5 | 4 | 6 | 7.5 | 9 | ||||||||||||||||||||||
| Lifting electric motor | Model | ZD141-4(ZDS10.8/7.5) | ZD151-4(ZDS11.5/13) | |||||||||||||||||||||||||||||||||||
| Capacity(k/w) | 7.5(0.8/7.5) | 13(1.5-13) | ||||||||||||||||||||||||||||||||||||
| Rotating speed(r/m) | 1380 | |||||||||||||||||||||||||||||||||||||
| phase | 3 | |||||||||||||||||||||||||||||||||||||
| Voltage(V) | 380 | |||||||||||||||||||||||||||||||||||||
| Current(A) | 18(2.4/18) | 30(4.3/30) | ||||||||||||||||||||||||||||||||||||
| Frequency(c/s) | 50 | |||||||||||||||||||||||||||||||||||||
| Lifting electric motor | Model | ZDYI21-4 | ||||||||||||||||||||||||||||||||||||
| Capacity(k/w) | 0.8 | 0.8×2 | ||||||||||||||||||||||||||||||||||||
| Rotating speed(r/m) | 1380 | |||||||||||||||||||||||||||||||||||||
| phase | 3 | |||||||||||||||||||||||||||||||||||||
| Voltage(V) | 380 | |||||||||||||||||||||||||||||||||||||
| Current(A) | 2.4 | 1.4×2 | ||||||||||||||||||||||||||||||||||||
| Frequency(c/s) | 50 | |||||||||||||||||||||||||||||||||||||
| Connection times(t/ph) | 120 | |||||||||||||||||||||||||||||||||||||
| Work rate(JC%) | 25% | |||||||||||||||||||||||||||||||||||||
Welcome to buy the newest and competitive price DAWSON DS-KMD DS-KCD Wire Rope Electric Hoist, Construction Hoist from our factory. We're one of the leading China manufacturers and suppliers, offering you the wholesale service and the OEM service at a discount. With CE certification, our products made in China in stock are high in quality and low in price. Please be free to get the free sample from us.
For further information, please contact us. Email:info@dawson-group.com
Other related products:
high quality electric hoist, electric hoist China supplier, electric hoist China manufacturer, electric hoist China factory, electric hoist China exporter, electric hoist China exporter, wholesale electric hoist, low price electric hoist
Production and Equipments:
Factory & Package Show: