Cloverleaf Sling Bag Slings - Lifting Slings
Product Description
Cloverleaf Sling Bag Slings - Lifting Slings
- Dawson Group Ltd. - China Manufacturer, Supplier, Factory
- Dawson Group Ltd. - China Manufacturer, Supplier, Factory
| Sling Types | C | I | E | S | P | A | L | F | B | M | R | |
Loading (Capacity) Dimensions | Width * Length | 100 * 120 | 100 * 120 | 100 * 100 | 120 * 120 | 145 * 115 | 115 * 115 | 120 * 120 | 165 * 165 | 140 * 140 | 130 * 95 | 170 * 120 |
| Height | 85 | 105 | 105 | 115 | 120 | 100 | 90 | 95 | 120 | 105 | 130 | |
Sling Measure | Basis A* B Sling (description) | 65 * 85 | 70 * 90 | 65 * 65 | 85 * 85 | 115 * 85 | 70 * 70 | 75 * 75 | 135 * 135 | 110 * 110 | 100 * 65 | 140 * 90 |
| ear development 'C' | 255 | 275 | 280 | 340 | 350 | 280 | 260 | 295 | 350 | 316 | 370 | |
| Tail 'D' taste- ning range | 80 | 90 | 90 | 120 | 135 | 85 | 80 | 100 | 135 | 107 | 140 | |
Dawson Manufacture supply cloverleaf slings with high quality, competitive price ,all the dimension are available on customer's request.
CLOVERLEAF SLING - DISPOSABLE CARGO LIFTING SLINGS, BAGS SLING, SLING
The most cost effective way to lift and transport goods without the use of pallets and or bulk bags.
More information:
How to Handling Instruction of a CloverLeaf Sling:
Precaution to be taken while handling:
INRRODUCE -- CLOVERLEAF SLINGS ----- DISPOSABLE FLAT BELT SLINGS
1, There are three types of materials used for disposable flat lifting slings, a polyethylene, a water resistant reinforced paper or a woven webbing outer layer to contain straight polyester fibres. They are made in several widths and strengths according to the intended use. The slings are designed for one load only (to enable that load to be despatched and received) and are not intended for repeated use.
2, They are normally used in the pre-slinging of bagged cargo and are assembled into a form known as 'cloverleaf' as the empty sling in plan view resembles a four leaf clover. Increasingly they are being used in the construction industry to lift sections of timber framed houses or roof trusses and in manufacturing for packs of steel, wood or plastic.
3, They are not used for general lifting purposes because, although they have a satisfactory but slightly lower factor of safety, they are not suitable for repeated use due to their comparatively light construction and low abrasive resistance. These slings should be disposed of once they have been detached from the load at the final destination.
4, Slings of this type are not individually proof tested, but any metal fittings, such as rings or links, should be proof tested in the normal way. This type of sling would not need to be subjected to periodic examination by a competent person, due to its disposable nature.
5, There is no specific standard for Disposable Flat Lifting Slings (the old Bristish standard has been withdrawn) therefore BS EN 1492-1: 2000 may be used as a guide to compliance with the Essential Safety Requirements of the Supply of Machinery Regulations 1992 Schedule 2 Part 4. There are however standards for the production of disposible bags, known as Flexible IBC’s BS EN 1898.2001 which should be used.