DSQ50002 50Ton Wheeled Removable Pneumatic Hydraulic Bottle Jack
- Dawson Group Ltd. - China Manufacturer, Supplier, Factory
Wheeled Removable Pneumatic Hydraulic Bottle Jack (professional grade)
Product structure introduction
Professional fast air pump: The inside of the air pump is hard oxidized, with stable performance and long service life. The continuous service life is more than 3000 times.
Handle connection structure and U-shaped head patented design
Multifunctional jack top: The wheeled movable pneumatic jack comes standard with 2 multifunctional and elevated jacks, which can meet the lifting needs of multiple scenarios.
Introduction to multifunctional heads
U-shaped jack head: can be used at the vehicle wheel axle to lift the vehicle chassis wheel frame.
Heightened jack head: suitable for vehicles with higher chassis for large-tonnage lifting
Product parameters
| Model | DSQ50002 |
| Load/T | 50 TON |
| Minimum height A/mm | 285 |
| Maximum height B/mm | 450 |
| Piston rod diameter C/mm | φ85 |
| Wheel diameter D/mm | φ100 |
| Base shape ExF/mm | 265×176 |
| Increase head height/mm | U type 1# 50mm
Roun type 2# 75mm |
| Product size GxHxB/mm | 376×280×285 |
| Packing size/mm | 430×285×325 |
| Net weight/gross weight kg | 35/36.5 |
| Packing quantity/20‘ | 460 pcs
|
Scenes to be used
Wheeled movable pneumatic roof: It is mainly used for chassis lifting of large vehicles. The product can be pushed to the designated position for operation through the combination of handle and wheels, which greatly improves work efficiency.
Products Show:
Common Problems And Solutions
Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.
Cleaning
If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.
Do not use motor oil or grease to lubricate the equipment
Rust Prevention:
-Check daily for any signs of rust or corrosion.
Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.
Storing the Equipment
1. Store in a dry location, recommended indoors.
2. Equipment should be stored in an area where they will not be subjected to damage.
3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.
4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.
5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.
6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.
Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.
Factory & Package Show:
English
