Cast-in Bolt CSN, Cast-in Hook CHFCHFL, Cast-in Hook PCHT

   

METRIC DIMENSION TABLE OF PRODUCTSS

M×P	D	D1	d1	L2	L1	L	T	T1	T2	H	R	Bearing capacity of lifting bolt(kg)	Bearing capacity of eye bolt(1 pcs vertically)(kg)	Bearing capacity of Eye bolt(45*2 pcs)(kg)
12x1.75	38	28	18	30	40	55	10	30	15	14	2	380	220	220
16x2.0	46	36	22	35	45	55	10	30	15	18	2	675	450	450
20x2.5	48	38	28	45	55	70	15	35	20	19	2	900	600	600
24x3.0	55	45	36	55	65	85	20	45	20	22.5	2	1360	1000	1000
30x3.5	65	52	42	65	75	95	25	50	20	26	3	2020	1700	1700
36x4.0	85	70	48	75	90	110	30	55	25	35	3	5960	2300	2300

Product features

The cast-in bolt for hook is embedded in the wall before mold casting.

Compared with the ordinary cast-in bolt for hook,it is interchangeable in addition to wear

resistance.

Material:The product is made of 535C.

The ordinary cast-in bolt for hook is round in shape.

Installation and use

The cast-in bolt for hook is embedded in the wall before mold casting,with the front end higher than the mold body,as shown below.

Fig.1: Two cast-in bolts for hook are buried on both sides to achieve horizontal lifting.Please refer to CSN in the specification table for the load to 

be lifted.

Fig.2: One cast-in bolt for hook is buried to achieve vertical lifting.Please refer to CSN in the specification table for the load to be lifted.

Fig.3: Two cast-in bolts for hook are buried to achieve 45-degree lifting.Please refer to CSN in the

     Specification table for the load to be lifted.

Products Show:

Cast-in Hook CHF/CHFL

Applicable Standards：EN ISO 12100:2010 conform to misumi standard

Model	D	CHF(D1)	CHFL(D1)	D2	T	A	B	C	E	Single load(kg)
CHF/CHFL-25	25	46	60	36	12.6	25	30	15	16.6	810
CHF/CHFL-32	32	55	70	42	13.1	30	40	20	16.8	1340
CHF/CHFL-36	36	60	80	46	18.5	35	45	25	17	1690
CHF/CHFL-40	40	70	90	55	18.9	35	60	30	17.4	2090
CHF/CHFL-50	50	90	120	70	25.2	35	70	40	18.1	3270
CHF/CHFL-70	70	120	140	100	31.1	40	80	40	19.4	6410

Installation and use

Products Show:

   

METRIC DIMENSION TABLE OF PRODUCTSS