DAWSON GROUP LTD.
You are here: Home » Products » Chain & Accessories » Welded Link Chain » EN818-7 3.2-22MM Grade 80 Alloy Load Chain for Chain Block, Class T DAT DT Hoist Load Chain, Grade T DAT DT Hoist Load Chain

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
sharethis sharing button

EN818-7 3.2-22MM Grade 80 Alloy Load Chain for Chain Block, Class T DAT DT Hoist Load Chain, Grade T DAT DT Hoist Load Chain

  • DAWSON/OEM

  • Grade 80 Alloy Load Chain EN818-7 for Chain Block

  • 4-22 mm

Availability:
Quantity:

3.2-22MM Grade 80 Alloy Load Chain EN818-7 for Chain Block, G80 Alloy Load Chain

Class T DAT DT Hoist Load Chain, Grade T DAT DT Hoist Load Chain

- Dawson Group Ltd. - China Manufacturer, Supplier, Factory


GRADE 80 ALLOY LOAD CHAIN(EN818-7) - DAWSON GROUP LTD. - CHINA MANUFACTURER, SUPPLIER, FACTORY     GRADE 80 ALLOY LOAD CHAIN(EN818-7) - DAWSON GROUP LTD. - CHINA MANUFACTURER, SUPPLIER, FACTORY

 

Definitions to European standard EN 818-7 

For the purposes of this Part of EN 818,the following definitions apply:

 

1. nominal size:  Nominal diameter of the round section steel wire or bar from which the chain is made.

2. material diameter: Diameter of the material in the chain link as measured.

3. weld diameter: Diameter at the weld as measured.

4. length dimensionally affected by welding: Length on either side of the center of the link, affected by welding.

5. pitch: Internal length of a link as measured.

6. manufacturing proof force(MPF) of chain: Force to which during manufacture the whole of the chain is subjected.

7. breaking force( BF): Maximum force which the chain withstands during the course of a static tensile test to destruction.

8. working load limit (WLL) of chain: Maximum mass which the chain hanging vertically is authorized to sustain in general lifting service.

9. total ultimate elongation (A): Total extension at the point of fracture of the chain expressed as a percentage of the internal length of the test sample.

10. processing: Any treatment of the chain subsequent to welding, for example, heat treatment, polishing or dimension calibration.

11. lot: Specified quantity from which test sample(s) is/are selected.

12. competent person: A designated person, suitably trained qualified by knowledge and practical experience, and with the necessary instructions to enable the required examination to be carried out.

NOTE: G80 HOIST CHAIN, LOAD CHAIN (BS EN 818-7:2002+A1:2008),Grade T (CLASS T, DAT and DT) -- 3.2×9MM,6.3×19MM, 7.1×21MM, 10×28MM, 11.2×34MM, 13×39MM, 16×48MM, 18×54MM, 20×60MM, 22×66MM IS ALSO AVAILABLE

Code No. Nominal Size Pitch External Width Internal Width Working Load Limit Manufacturing Proof Force Min. Breaking Force Min. Bend Deflection Weight
D L B b
mm mm mm mm t kN kN mm kg/m
DS-C0001H 4.0 12.0 13.2 5.2 0.5 12.6 20.1 3.2 0.349
DS-C0002H 5.0 15.0 16.5 6.5 0.8 19.6 31.4 4.0 0.545
DS-C0003H 6.0 18.0 19.8 7.8 1.1 28.3 45.2 4.8 0.785
DS-C0004H 7.0 21.0 23.1 9.1 1.5 38.5 61.6 5.6 1.069
DS-C0005H 8.0 24.0 26.4 10.4 2.0 50.3 80.4 6.4 1.396
DS-C0006H 9.0 27.0 29.7 11.7 2.5 63.6 102.0 7.2 1.849
DS-C0007H 10.0 30.0 33.0 13.0 3.2 78.5 126.0 8.0 2.181
DS-C0008H 12.0 36.0 39.6 15.6 4.5 113 181.0 9.6 3.251
DS-C0009H 13.0 39.0 43.0 17.0 5.3 133 212.0 10.0 3.689
DS-C0010H 16.0 48.0 55.5 23.5 8.0 201 322.0 13.0 5.571
DS-C0011H 18.0 54.0 61.0 25.0 10.0 254 407.0 14.0 7.154
DS-C0012H 20.0 60.0 68.0 28.0 12.5 314 503.0 16.0 8.641
DS-C0013H 22.0 66.0 73.5 29.5 15.0 380 608.0 18.0 10.391

Product specifications:

3.2×9MM G80 Alloy Load Chain, 4×12MM G80 Alloy Load Chain, 5×15MM G80 Alloy Load Chain, 6×18MM G80 Alloy Load Chain, 6.3×19MM G80 Alloy Load Chain, 7×21MM G80 Alloy Load Chain, 7.1×21MM G80 Alloy Load Chain, 8×24MM G80 Alloy Load Chain, 9×27MM G80 Alloy Load Chain, 10×28MM G80 Alloy Load Chain, 10×30MM G80 Alloy Load Chain, 11.2×34MM G80 Alloy Load Chain, 12×36MM G80 Alloy Load Chain, 13×39MM G80 Alloy Load Chain, 16×48MM G80 Alloy Load Chain, 18×54MM G80 Alloy Load Chain, 20×60MM G80 Alloy Load Chain, 22×66MM G80 Alloy Load Chain


3.2×9MM Grade 80 Hoist Load Chain, 4×12MM Grade 80 Hoist Load Chain, 5×15MM Grade 80 Hoist Load Chain, 6×18MM Grade 80 Hoist Load Chain, 6.3×19MM Grade 80 Hoist Load Chain, 7×21MM Grade 80 Hoist Load Chain, 7.1×21MM Grade 80 Hoist Load Chain, 8×24MM Grade 80 Hoist Load Chain, 9×27MM Grade 80 Hoist Load Chain, 10×28MM Grade 80 Hoist Load Chain, 10×30MM Grade 80 Hoist Load Chain, 11.2×34MM Grade 80 Hoist Load Chain, 12×36MM Grade 80 Hoist Load Chain, 13×39MM Grade 80 Hoist Load Chain, 16×48MM Grade 80 Hoist Load Chain, 18×54MM Grade 80 Hoist Load Chain, 20×60MM Grade 80 Hoist Load Chain, 22×66MM Grade 80 Hoist Load Chain

Welcome to buy the newest and cheap DAWSON g80 alloy load chain forged super alloy steel from our factory. We're one of the leading China manufacturers and suppliers, offering you the wholesale service and the OEM service at a discount. With CE certification, our products made in China in stock are high in quality and low in price. Please be free to get the free sample from us.



BS EN 818-7:2002+A1:2008 Short link chain for lifting purposes. Safety. Fine tolerance hoist chain, Grade T (Types T, DAT and DT)BS EN 818-7 specifies the requirements related to safety for hoist chain, Grade T (type T quenched and tempered and types DAT and DT case hardened), for use in serial chain hoists manual and power driven.

Type DAT and type DT hoist chains possess surface hardnesses greater than core hardness and are used for power driven chain hoists to offer greater resistance to wear.

Type DT hoist chain differs from DAT hoist chain in having higher surface hardness and/or greater case depth to optimise wear resistance.

BS EN 818-7 applies to electrically welded round steel short link hoist chains conforming to BS EN 818-1.

The range of nominal size of hoist chains covered by BS EN 818-7 is from 3.2 mm to 22 mm.

Products Show:

G80 Alloy Chain, Grade 80 Short Link Chain for Chain Slings - Dawson Group Ltd. - China Manufacturer, Supplier, Factory
G80 Alloy Chain, G80 Alloy Lifting Chain for Chain Slings - Dawson Group Ltd. - China Manufacturer, Supplier, Factory
G80 Alloy Lifting Chain, Grade 80 Short Link Chain for Chain Slings - Dawson Group Ltd. - China Manufacturer, Supplier, Factory
Grade 80 Alloy Lifting Chain, G80 Short Link Chain for Chain Slings - Dawson Group Ltd. - China Manufacturer, Supplier, Factory
G80 Alloy Chain, Grade 80 Alloy Lifting Chain for Chain Slings - Dawson Group Ltd. - China Manufacturer, Supplier, Factory
G80 Alloy Chain, Grade 80 Alloy Lifting Chain - Dawson Group Ltd. - China Manufacturer, Supplier, Factory
Grade 80 Alloy Chain, G80 Short Link Chain for Chain Slings - Dawson Group Ltd. - China Manufacturer, Supplier, Factory
G80 Alloy Chain, Grade 80 Short Link Chain for Chain Slings - Dawson Group Ltd. - China Manufacturer, Supplier
G80 Alloy Chain, G80 Alloy Lifting Chain for Chain Slings - Dawson Group Ltd. - China Manufacturer, Supplier
Grade 80 Alloy Chain, G80 Short Link Chain for Chain Slings - Dawson Group Ltd. - China Manufacturer, Supplier
G80 Alloy Lifting Chain, Grade 80 Short Link Chain for Chain Slings - Dawson Group Ltd. - China Manufacturer, Supplier, Factory (2)
Grade 80 Alloy Lifting Chain, G80 Short Link Chain for Chain Slings - Dawson Group Ltd. - China Manufacturer, Supplier

Other Related Products Show:

Black Oxide G80 Short Link Chain, Lifting Chain - Dawson Group Ltd. - China Manufacturer, Factory
Black Oxide G80 Short Link Chain, Lifting Chain - Dawson Group Ltd. - China Manufacturer, Supplier

Chain Slings - Dawson Group Ltd. - China Manufacturer, Factory, Supplier
Chain Slings - Dawson Group Ltd. - China Manufacturer, Supplier, Factory
Steel Chain - Dawson Group Ltd. - China Supplier, Manufacturer, Factory
Steel Chain - Dawson Group Ltd. - China Manufacturer, Supplier, Factory
DAWSON Chain - Dawson Group Ltd. - China Manufacturer, Supplier, Factory

Hot Tags: Load Chain China Supplier, Alloy Steel Load Chain Factory, Hot Sale Alloy Load Chain, Customized Alloy Steel Load Chain, Buy Discount G80 Alloy Load Chain, Low Price Alloy Load Chain, EN818-7 Alloy Load Chain Manufacturer, Grade 80 Alloy Chain, G80 Alloy Chain for Lifting Use, NACM Alloy Load Chain, G80 Alloy Chain for Lifting In Stock, Alloy Load Chain Free Sample, Wholesale Alloy Load Chain, Cheap Price Alloy Load Chain,Alloy Load Chain OEM


Welded Link Chain
Grade 80 Alloy Lashing Chain / G80 Welded Long Link Chain for Cargo Lashing Grade 80 Alloy Load Chain EN818-7 for Chain Block
Grade 80 Alloy Lifting Chain EN818-2, G80 Lifting Chain  Heavy Duty High Alloy Steel Black Coated Mining Chain
Chain for Grab Bucket G43 Trailer Safety Chains Assembly with Slip Clevis Hook & Latch
G30 Trailer Safety Chains Assembly with S Hook DIN764 Link Chain
G30 Proof Coil Chain ASTM1980 Standard G43 High Test Chain NACM1996/2003 Standard

Package of Chain:

Package of Grade 80 Alloy Load Chain EN818-7 for Chain Block - Dawson Group LTD. - China Manufacturer, Supplier, Factory

Factory & Package Show:

Factory about Grade 80 Alloy Load Chain EN818-7 for Chain Block, G80 Alloy Load Chain - Dawson Group Ltd. - China Manufacturer, Supplier, Factory
Package of Grade 80 Alloy Load Chain EN818-7 for Chain Block, G80 Alloy Load Chain - Dawson Group Ltd. - China Manufacturer, Supplier, Factory

Previous: 
Next: