DAWSON GROUP LTD.
You are here: Home » Products » Wire Rope & Accessories » Wire Rope Clips » EN 13411-5 - 2003 Type A U-Bolt Wire Rope Grips, Din 1142 Galv. Malleable Wire Rope Clip
Share to:

EN 13411-5 - 2003 Type A U-Bolt Wire Rope Grips, Din 1142 Galv. Malleable Wire Rope Clip

Galv. Malleable Wire Rope Clip Din 1142
Material: Body with malleable cast, Heavy duty Type, U-BOLT with mild steel.
Finished: Galv.
Packing: Gunny Bags and then on pallets.
Minimum order quantity: 200pcs for one size.

  • DAWSON/OEM
  • DS-GMWC42
  • 5-40mm
  • 1000pcs
Quantity:

Din 1142 Galv. Malleable Wire Rope Clip, EN 13411-5 - 2003 Type A U-Bolt Wire Rope Grips

- Dawson Group Ltd. - China Manufacturer, Supplier, Factory

EN 13411-5 - 2003 U-Bolt Wire Rope Grips, Galv. Malleable Wire Rope Clip Din 1142 - Dawson Group Ltd. - China Manufacturer, Supplier, Factory, Exporter       EN 13411-5 - 2003 U-Bolt Wire Rope Grips, Galv. Malleable Wire Rope Clip Din 1142 - Dawson Group Ltd. - China Manufacturer, Supplier, Factory, Exporter
Galv. Malleable Wire Rope Clip Din 1142
Material: Body with malleable cast, Heavy duty Type, U-BOLT with mild steel.
Finished: Galv.
Packing: Gunny Bags and then on pallets.

  

ITEM NO SIZE
mm
A
mm
B
mm
C
mm
D
mm
E
mm
F
mm
G
mm
DS-GMWC4205 5 12 13 25 5 13 14 25
DS-GMWC4206 6.5 14 16 30 6 14 17 32
DS-GMWC4208 8 18 20 39 8 18 20 41
DS-GMWC4210 10 20 20 40 8 21 24 46
DS-GMWC4212 12 24 25 50 10 24 28 56
DS-GMWC4213 13 29 28 55 12 29 29 64
DS-GMWC4214 14 28 30 59 12 28 31 66
DS-GMWC4216 16 34 32 64 14 35 35 76
DS-GMWC4219 19 37 33 68 14 40 36 83
DS-GMWC4222 22 41 34 74 16 44 40 96
DS-GMWC4226 26 46 38 84 20 51 50 111
DS-GMWC4230 30 54 41 95 20 59 55 127
DS-GMWC4234 34 60 45 105 22 67 60 141
DS-GMWC4240 40 68 49 117 24 77 65 159

Application

Wire rope clips are used on wire rope eye-loop connections or complete loops, end-to-end connections where socketing or splicing is not feasible or when a temporary joint is required.


Range

Dawson offers a wide range of wire rope clips in specifically standardized models such as EN 13411-5 and DIN wire rope clips. also offers a wide range of other wire rope clips


Design

Dawson wire rope clips are drop forged and have a bridge with grooves to tighten the wire rope properly in the clip; the DIN wire rope clips have a malleable base, without grooves.

Wire rope clips are generally marked with:

• manufacturer’s symbol  - e.g. DAWSON

• wire rope diameter in mm or inches  - e.g. 13 or 1/2”

• traceability code  - e.g. DS21


Instructions for use

Wire rope clips should be inspected before use to ensure that:

• all markings are legible;

• a wire rope clip with the correct dimensions has been selected;

• the nuts or any other locking system cannot vibrate out of position;

• the wire rope clip is free from nicks, gouges and cracks;

• never modify, repair or reshape a wire rope clip by machining, welding, heating or bending as this may affect their performance.

The wire rope clip should be fitted to the wire rope as shown in below figures. The bridge of the wire rope clip should always be placed on the load bearing part of the rope. The U-bolt of the clip should be placed on the rope tail, also known as the dead end of the rope. Turn back enough wire rope length so that the required minimum number of clips can be installed according to the instructions below.

The first clip must be placed one bridge width from the turned-back rope tail or dead end of the rope, according to figure 1. Tighten the nuts to the specified torque.

American Type US Type Drop Forged Heavy Duty Wire Rope Clips EN 13411-5 type B - Dawson Group Ltd. - China Manufacturer, Supplier

The second clip must be placed immediately against the thimble. Take care that the correct tightening of the clip does not damage the outer wires of the wire rope (figure 2). Tighten the nuts firmly but not yet to the specified torque.

American Type US Type Drop Forged Heavy Duty Wire Rope Clips EN 13411-5 type B - Dawson Group Ltd. - China Manufacturer, Factory

The following clips should be placed on the wire rope between the first and second clip in such a way that they are separated by at least 1½ times the clip-width with a maximum of 3 times the clip-width, according to figure 3.

American Type US Type Drop Forged Heavy Duty Wire Rope Clips EN 13411-5 type B - Dawson Group Ltd. - China Manufacturer, Factory, Supplier

Apply light tension on the rope and tighten all nuts evenly, alternating until reaching the specified torque.

After assembly and before the rope is taken into service, the nuts must be tightened further to the prescribed torque. After the load has been applied to the assembly for the first time, the torque value must be checked and corrected if necessary. Re-tightening of the nuts must be done at 10.000 cycles (heavy usage), 20.000 cycles (moderate usage) or 50.000 cycles (light usage). If cycles are unknown, a competent person could fix a time period, e.g. every 3 months, 6 months, annually.

The torque values and the minimum number of clips to be applied for a particular rope size are given in the following tables.


diameter wire rope diameter wire rope min. no of clips required length of rope to turn back torque value torque value
inch mm
mm Nm Ft.Lbs
1/8 3-4 2 85 6.1 4.5
3/16 5 2 95 10.2 7.5
1/4 6-7 2 120 20.3 15
5/16 8 3 133 40.7 30
3/8 9-10 3 165 61 45
7/16 11 3 178 88 65
1/2 12-13 3 292 88 65
9/16 14-15 3 305 129 95
5/8 16 3 305 129 95
3/4 18-20 4 460 176 130
7/8 22 4 480 305 225
1 24-26 5 660 305 225
1-1/8 28-30 6 860 305 225
1-1/4 32-34 7 1120 488 360
1-3/8 36 7 1120 488 360
1-1/2 38-40 8 1370 488 360
1-5/8 41-42 8 1470 583 430
1-3/4 44-46 8 1550 800 590
2 48-52 8 1800 1017 750
2-1/4 56-58 8 1850 1017 750
2-1/2 62-65 9 2130 1017 750
2-3/4 68-72 10 2540 1017 750
3 75-78 10 2690 1627 1200

Table 1, Dawson wire rope clips generally to EN 13411-5 Type B, required number and torque value

diameter wire rope min. no of clips required Torque value Torque value
mm
Nm Ft.lbs
5 3 2 1.5
6.5 3 3.5 2.6
8 4 6 4.4
10 4 9 6.6
12 4 20 14.8
13 4 33 24.3
14 4 33 24.3
16 4 49 36
19 5 68 50
22 5 107 79
26 5 147 108
30 6 212 156
34 6 296 218
40 6 363 268

Table 2, Wire rope clips generally to EN 13411-5 Type A, required number and torque value


The efficiency of a wire rope termination made with wire rope clips depends on the correct placement of the clips on the rope and on correct fitting and tightening of the clips. With inadequately tightened nuts or with an insufficient number of wire rope clips the rope end may slide through the clips during use.

The fitting of the clips on the ropes may be affected by various circumstances, such as:

• the nut may be tight on the thread, yet not tight against the bridge;

• contamination of the thread by dirt, oil or corrosion products, which may prevent correct tightening of the nut.

Forged wire rope clips provide greater bearing surface and more consistent strength than malleable cast iron clips.

Suitable applications of wire rope clips to EN 13411-5 standards include suspending static loads and single use lifting operations which have been assessed by a competent person taking into account appropriate safety factors.

Wire rope clips should not be used in following applications:

• hoist ropes in mines;

• rope drives for cranes in steel works and rolling mills;

• permanent fastening of ropes in other rope drives;

• rope terminations for load suspension devices in the operation of lifting appliances, except in the case of lifting tackles where these are produced for a special application and used only once.

Wire rope clips must be regularly inspected in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. Which may lead to deformation and alteration of the material structure. Inspection should take place at least every six months and more frequently when the products are used in severe operating conditions.


Products Detail:

Products Details of DIN 1142 Wire Rope Clips - Dawson Group Ltd. - China Manufacturer, Supplier, Factory, Exporter

Products Details of DIN 1142 Wire Rope Clips - Dawson Group Ltd. - China Manufacturer, Supplier, Factory, Exporter
US Type Malleable Wire Rope Clips - Dawson Group Ltd. - China Supplier, Manufacturer, Factory
US Type Malleable Wire Rope Clips - Dawson Group Ltd. - China Supplier, Manufacturer
US Type Malleable Wire Rope Clips - Dawson Group Ltd. - China Manufacturer, Factory

Steel Wire Rope - Dawson Group Ltd. - China Manufacturer, Supplier, Factory
Steel Wire Rope - Dawson Group Ltd. - China Supplier, Manufacturer, Factory
Spliced Soft Eye Slings - Dawson Group Ltd. - China Manufacturer, Supplier, Factory
Wire Rope Grips, Double Eye Cable Socks Type B - Dawson Group Ltd. - China Manufacturer, Supplier, Factory
Wire Rope Grips, Double Eye Cable Socks Type B - Dawson Group Ltd. - China Manufacturer, Factory, Supplier
Thread Lifting Loop, Lifting Clutch System - Dawson Group Ltd. - China Manufacturer, Factory, Supplier

Factory & Package Show:

Lifting Ring Clutch, Lifting Clutch System
Lifting Ring Clutch, Lifting Clutch System - Dawson Group Ltd. - China Manufacturer, Factory, Supplier

Factory of WS71-E-E,T,TH,S&K Flemish Eye Splice Wire Rope Slings - Dawson Group Ltd. - China Manufacturer, Supplier, Factory
Package of WS71-E-E,T,TH,S&K Flemish Eye Splice Wire Rope Slings - Dawson Group Ltd. - China Manufacturer, Supplier, Factory

>If you have any suggestions or opinions about our products, please leave a message, and we will immediately answer your questions. Thanks for your support.

Product Inquiry

Related News

content is empty!

  Tel Number:
+86-532-86660581
Website:
General Manager: Janet Zhao
Contact info: Dawson Joe
Copyright © 2015,Dawson Group Ltd. All Resolved       Site Map