You are here: Home » Products » Manual Hoists & Lifting Equipment » Chain Hoist / Chain block » DSVD Chain Block
Share to:

DSVD Chain Block

  • DAWSON/OEM
  • DSVD
  • 0.5-10Ton
Capacity(T):
0.5 1 1.5 2 3 5 10
Net weight(kg):
Quantity:
DSVD Chain Block
- Dawson Group Ltd. - China Manufacturer, Supplier, Factory
DSVD Chain Block      DSVD Chain Block Dawson-group

Introduction
 
All Steel Construction-Impact resistant covers that provide durability and protection.
Double pawl and double guide rollers enhance performance, safety, and reliability.
Unique curling design-This feature enables the hand chain to successfully feed directly into the wheel sprocket from many directions and angles.
Grade 80 Load Chain –Grade 80 black oxide coated load chain for durability 
Forged alloy Steel Hooks -Industrial rated hooks rotate 360 degrees for easy rigging. Hooks slowly stretch to indicate an overload situation increasing  jobsite safety.
Sealed roller bearing-Greatly improving performance and serve life of the product .
Certification-Load tested to 150% of capacity with certificate.

Model Capacity
(T)
Standard lift
(m)
Running test
(T)
Effort required to lift max load (N) No. of falls of load chain Load chain
diameter(mm)
Dimension(mm) Net weight(kg) Packing
(LWH)(cm)
A B C H
DSVD-0.5T 0.5 2.5 0.75 240 1 5 132 148 28 345 11 241918
DSVD-1T 1 2.5 1.5 250 1 6 151 172 32 376 12.5 282121
DSVD-1.5T 1.5 2.5 2.25 265 1 7.1 173 196 36 442 17.8 342620
DSVD-2T 2 3 3 335 1 8 175 210 36 470 19.5 342620
DSVD-3T 3 3 4.5 363 1 10 176 230 46 565 29 342620
DSVD-5T 5 3 7.5 360 2 9 189 280 46 688 41.3 413224
DSVD-10T 10 3 15 380 4 9 189 463 57 765 78.5 484218.5

DAWSON manual chain hoists are commonly known as chain blocks and are designed for heavy duty lifting and materials handling operations. Chain blocks raise and lower loads by pulling on the hand chain. Chain blocks can be of single or double fall configurations depending on the capacity of the block.

INSPECTION BEFORE USE
Ensure that the chain block name plate and WLL is clearly visible and legible.
The pre-use inspection for a chain block should include the following:

Load chain
1.Inspect chain for wear.
2.Inspect chain for gouges, nicks, arc burns, twisted & bent links and corrosion.
3.Inspect for correct reeving on multi-reeved units (3 and 5 tonne).
Lift wheels & Sheave wheels
1.Inspect lift wheel for foreign material, wear and corrosion.
2.Inspect dead end pins for wear, tightness and corrosion.

Hooks
1.Inspect hooks for signs of opening, cracking, bending, arc burns and corrosion.
2.Hooks should swivel freely.
3.Inspect safety latches for condition & operation.
4.Measure the hook throats for allowable service openings.
 
Hand chain
1.Inspect chain for wear.
2.Inspect chain for twisted or gouged links and corrosion.
3.Inspect connecting link for signs of opening.
Miscellaneous
1.Inspect frame and covers for distortion, cracks, gouges, corrosion & other damage.
2.Inspect hangers (3 and 5 tonne) for cracks, gouges, corrosion & other damage.
3.Inspect unit for clear WLL identity.
 
CARE IN USE
1.The load chain must always mesh correctly with the load sheave. With multi fall chain blocks twists can arise by turning over the bottom hook through the load chain.
2.Regularly lubricate the whole length of the load chain with machine or gear oil but be careful not to over lubricate as oil or grease on the brake discs can cause the brake to malfunction and slip.
3.Confirm that the brake is functioning properly by hoisting the load 100mm and check the brake when lowering the load.
4.Non-vertical (sideways pulling) of the hand chain is not recommended on our chain blocks.
5.The hand chain is equipped with a safety link. When the safety link opens or deforms, stop at once and inspect for the cause.
6.Confirm that the monorail beam or structure supporting the chain block is of sufficient strength to support the load to be lifted.
7.Never lift loads in excess of the WLL of the chain block.
8.Never walk or work under a hoisted load and never lift, support or transport people.
9.Use chain blocks manually only.
10.Do not permit more than one operator to pull on the hand chain at one time.
11.Lift loads correctly with proper slings and attachments. Never lift with the point of the hook and never use the load chain as a sling by back hooking.
12.Lifting a load with two chain blocks is not recommended. If the operation is unavoidable, hoist the load with utmost care, keeping the load balanced.
13.Never run the load chain out too far. When operated beyond the range of lift, an excessive load that can cause damage will be imposed on the chain block.
14.Chain blocks are designed for lifting loads vertically and should not be used for horizontal or angle hoisting.
15.Extreme temperatures will reduce the durability of the hoist. Loads should be hoisted or lowered very slowly and carefully in extreme temperatures.
16.Never leave a load hanging on the hoist.
17.Never use the chain or hook as a ground for welding.
 
Asbestos free brake, holding load at any desired height. 
- Robust all-steel construction. 
- Top and bottom hooks are fitted with safety latches as standard. 
- All rotating components mounted on roller or ball bearings to reduce friction & increase efficiency.
products show:
DSVD Chain Block details
DSVD Chain Block
Other related products:
DSHSZ-A 623 Series Chain Block - Dawson Group Ltd. - China Manufacturer, Supplier, FactoryDSHSZ-A 623 Series Chain Block - Dawson Group Ltd. - China Manufacturer, Supplier, FactoryDSHSZ-A 623 Series Chain Block - Dawson Group Ltd. - China Manufacturer, Supplier, Factory
Factory & Package Show:
 
Factory of Chain Block-China Manufacturers Suppliers
DSVD Chain Block - Dawson Group Ltd. - China Manufacturer, Supplier, Factory

  Tel Number:
+86-532-86660581
Website:
General Manager: Janet Zhao
Contact info: Dawson Joe
Copyright © 2015,Dawson Group Ltd. All Resolved       Site Map