DAWSON GROUP LTD.

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
sharethis sharing button

DSQ50002 50Ton Pneumatic Hydraulic Bottle Jack

  • DAWSON/OEM

  • DSQ50002

  • 50T

Availability:
Quantity:

DSQ50002 50Ton Pneumatic Hydraulic Bottle Jack
- Dawson Group Ltd. - China Manufacturer, Supplier, Factory

Pneumatic Hydraulic Bottle Jack DSQ50002 50Ton - Dawson Group Ltd. - China Manufacturer, Supplier, Factory

    Model:DSQ50002      
    Capacity:50Ton
    Min.Height(mm):290 
    Lift Height(mm):160 
    Adjustable Height(mm):/
    Max. Height(mm):450 
    N.W. / G.W.(kg):34/36
    Package Size(mm):460x280x310
    QTY/20 'CY(PCS):455 


Products Show:

DSQ50002 50Ton Pneumatic Hydraulic Bottle Jack - Dawson Group Ltd. - China Manufacturer, Supplier
DSQ50002 50Ton Pneumatic Hydraulic Bottle Jack - Dawson Group Ltd. - China Manufacturer, Factory
DSQ50002 50Ton Pneumatic Hydraulic Bottle Jack - Dawson Group Ltd. - China Supplier, Factory

Pneumatic Hydraulic Bottle Jack
DSTQ20002S 20 Ton Pneumatic Hydraulic Bottle Jacks DSTQ20002 20 Ton Pneumatic Hydraulic Bottle Jacks
DSTQ20002 20 Ton Pneumatic Hydraulic Bottle Jack DSTQ12002S 12Ton Pneumatic Hydraulic Bottle Jack
DSTQ12002 12Ton Pneumatic Hydraulic Bottle Jacks DSTQ12002 12Ton Pneumatic Hydraulic Bottle Jack
DSQ50002 50Ton Pneumatic Hydraulic Bottle Jack DSQ35002 35Ton Pneumatic Hydraulic Bottle Jack
DSQ30002 30Ton Pneumatic Hydraulic Bottle Jack DSQ05002 5Ton Pneumatic Hydraulic Bottle Jack


Common Problems And Solutions

Maintain your equipment. It is recommended that the general condition of any equipment be examined before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and maintenance. Have necessary repairs made by qualified service personnel.

Cleaning

If the moving parts of the equipment are obstructed, use cleaning solvent or another good degreaser to clean the equipment. Remove any existing rust, with a penetrating lubricant.

Do not use motor oil or grease to lubricate the equipment

Rust Prevention:

-Check daily for any signs of rust or corrosion.

Without a load lift the equipment as high as it goes and look under and behind the lifting points. If signs of rust are visible clean as needed.

Storing the Equipment

1. Store in a dry location, recommended indoors.

2. Equipment should be stored in an area where they will not be subjected to damage.

3. If extreme temperatures or chemically active or abrasive environments are involved, the guidance provided in shall be followed.

4. Temperature - When equipment is used at temperatures above 140"F (60"C) or below -20"F (-29"C), the equipment manufacturer or a qualified person should be consulted.

5. Chemically Active Environments -The strength and operation of eqipment can be affected by chemically active environments such as caustic or acid substances or fumes. The equipment manufacturer or a qualified person should be consulted before equipment are used in chemically active environments.

6. Other Environments - The internal workings of equipment can be affected by high moisture, gravel or sand, silt, grit, or other dust-laden air. Equipment subject to these environments should have their inner components frequently cleaned, inspected, and lubricated.

Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the equipment stays in good working condition.



Factory & Package Show:

Factory of DSQ50002 50Ton Pneumatic Hydraulic Bottle Jack - Dawson Group Ltd. - China Manufacturer, Supplier, Factory
Package of DSQ50002 50Ton Pneumatic Hydraulic Bottle Jack - Dawson Group Ltd. - China Manufacturer, Supplier, Factory



Previous: 
Next: