- Dawson Group Ltd. - China Manufacturer Supplier, Factory
| Item no | WLL/T | Thread
M | Technical parameter/mm | Weight/kg |
| X | (Z) | A | B | C | D | E | F | S | W |
| DS084-06 | 0.1 | (0.6) | 6 | 34 | 25 | 8.5 | 11 | 9 | 28 | 6 | 47 | 0.14 |
| DS084-08 | 0.3 | (1) | 8 | 34 | 25 | 8.5 | 11 | 12 | 28 | 6 | 47 | 0.14 |
| DS084-10 | 0.4 | (1) | 10 | 34 | 25 | 8.5 | 11 | 15 | 28 | 6 | 47 | 0.14 |
| DS084-12 | 0.75 | (2) | 12 | 42 | 30 | 10 | 13 | 18 | 34 | 8 | 56 | 0.25 |
| DS084-14 | 0.75 | (2) | 14 | 42 | 30 | 10 | 13 | 18 | 34 | 8 | 56 | 0.30 |
| DS084-16 | 1.5 | (4) | 16 | 49 | 35 | 14 | 15 | 24 | 40 | 10 | 65 | 0.45 |
| DS084-18 | 1.5 | (4) | 18 | 49 | 35 | 14 | 15 | 24 | 40 | 10 | 65 | 0.5 |
| DS084-20 | 2.3 | (6) | 20 | 57 | 40 | 16 | 17 | 30 | 50 | 12 | 75 | 0.7 |
| DS084-22 | 2.3 | (6) | 22 | 57 | 40 | 16 | 17 | 30 | 50 | 12 | 75 | 0.8 |
| DS084-24 | 3.2 | (8) | 24 | 70 | 48 | 19 | 21 | 36 | 62 | 14 | 90 | 1.14 |
| DS084-27 | 3.2 | (8) | 27 | 70 | 48 | 19 | 21 | 36 | 62 | 14 | 90 | 1.2 |
| DS084-30 | 4.5 | (12) | 30 | 86 | 60 | 24 | 26 | 45 | 75 | 17 | 112 | 2.2 |
| DS084-33 | 4.5 | (12) | 33 | 86 | 60 | 24 | 26 | 45 | 75 | 17 | 112 | 2.4 |
| DS084-36 | 7 | (16) | 36 | 103 | 72 | 29 | 32 | 54 | 90 | 22 | 135 | 4 |
| DS084-42 | 9 | (24) | 42 | 120 | 82 | 34 | 38 | 63 | 105 | 24 | 158 | 6.43 |
| DS084-48 | 12 | (32) | 48 | 137 | 94 | 38 | 43 | 72 | 120 | 27 | 180 | 9.8
|
Note: Inch or non-standard lengthened bolts can be made according to customer's requirements.
Brief introduction
G80 eye type rotating rings the SAE8620H special alloy forging and high strength quenched and tempered after treatment, according to the standard of a EN1677-4.
And direction safety factor is 4 times.
The rated load than the tradition DIN580 ring screw is more than 5 times higher.
The locking bolt, the ring body can rotate 360 degrees.
In the case of multi limb lifting sling, ring body parts can be automatically adjusted with the direction of rotation or tensile stress angle.
G80 Eye type rotary lifting force form
| Force form | | | | | | |
| |
| Number of limb | 1 | 2 | 1 | 2 | 2 | 2 | 3-4 | 3-4 |
| Load direction | 0° | 0° | 90° | 90° | 0-45°45-60° | asymmetric | 0-45°45-60° | asymmetric |
| Item NO. | Thread M | WLL/T |
| DS084-08 | 8 | 1 | 2 | 0.3 | 0.6 | 0.42 | 0.3 | 0.3 | 0.63 | 0.45 | 0.3 |
| DS084-10 | 10 | 1 | 2 | 0.4 | 0.8 | 0.56 | 0.4 | 0.4 | 0.8 | 0.6 | 0.4 |
| DS084-12 | 12 | 2 | 4 | 0.75 | 1.5 | 1 | 0.75 | 0.75 | 1.5 | 1.1 | 0.75 |
| DS084-14 | 14 | 2 | 4 | 0.75 | 1.5 | 1 | 0.75 | 0.75 | 1.5 | 1.1 | 0.75 |
| DS084-16 | 16 | 4 | 8 | 1.5 | 3 | 2.1 | 1.5 | 1.5 | 3.1 | 2.2 | 1.5 |
| DS084-18 | 18 | 4 | 8 | 1.5 | 3 | 2.1 | 1.5 | 1.5 | 3.1 | 2.2 | 1.5 |
| DS084-20 | 20 | 6 | 12 | 2.3 | 4.6 | 3.2 | 2.3 | 2.3 | 4.8 | 3.4 | 2.3 |
| DS084-22 | 22 | 6 | 12 | 2.3 | 4.6 | 3.2 | 2.3 | 2.3 | 4.8 | 3.4 | 2.3 |
| DS084-24 | 24 | 8 | 16 | 3.2 | 6.4 | 4.5 | 3.2 | 3.2 | 6.7 | 4.8 | 3.2 |
| DS084-27 | 27 | 8 | 16 | 3.2 | 6.4 | 4.5 | 3.2 | 3.2 | 6.7 | 4.8 | 3.2 |
| DS084-30 | 30 | 12 | 24 | 4.5 | 9 | 6.3 | 4.5 | 4.5 | 9.4 | 6.7 | 4.5 |
| DS084-33 | 33 | 12 | 24 | 4.5 | 9 | 6.3 | 4.5 | 4.5 | 9.4 | 6.7 | 4.5 |
| DS084-36 | 36 | 16 | 32 | 7 | 14 | 9.8 | 7 | 7 | 14.7 | 10.5 | 7 |
| DS084-42 | 42 | 24 | 48 | 9 | 18 | 12.6 | 9 | 9 | 18.9 | 13.5 | 9 |
| DS084-48 | 48 | 32 | 64 | 12 | 24 | 16.8 | 12 | 12 | 25 | 18 | 12
|
Products Show:
G80 Lifting Points Catalogues Download:
Package of G80 Lifting Points:
Production Equipment:
Test Equipment:
Application of G80 Eye Type Lifting Screw Points:
We have any other related products, if you have any intrest, please contact us, info@dawson-group.com!
- Dawson Group Ltd. - China Manufacturer Supplier, Factory
| Item no | WLL/T | Thread
M | Technical parameter/mm | Weight/kg |
| X | (Z) | A | B | C | D | E | F | S | W |
| DS084-06 | 0.1 | (0.6) | 6 | 34 | 25 | 8.5 | 11 | 9 | 28 | 6 | 47 | 0.14 |
| DS084-08 | 0.3 | (1) | 8 | 34 | 25 | 8.5 | 11 | 12 | 28 | 6 | 47 | 0.14 |
| DS084-10 | 0.4 | (1) | 10 | 34 | 25 | 8.5 | 11 | 15 | 28 | 6 | 47 | 0.14 |
| DS084-12 | 0.75 | (2) | 12 | 42 | 30 | 10 | 13 | 18 | 34 | 8 | 56 | 0.25 |
| DS084-14 | 0.75 | (2) | 14 | 42 | 30 | 10 | 13 | 18 | 34 | 8 | 56 | 0.30 |
| DS084-16 | 1.5 | (4) | 16 | 49 | 35 | 14 | 15 | 24 | 40 | 10 | 65 | 0.45 |
| DS084-18 | 1.5 | (4) | 18 | 49 | 35 | 14 | 15 | 24 | 40 | 10 | 65 | 0.5 |
| DS084-20 | 2.3 | (6) | 20 | 57 | 40 | 16 | 17 | 30 | 50 | 12 | 75 | 0.7 |
| DS084-22 | 2.3 | (6) | 22 | 57 | 40 | 16 | 17 | 30 | 50 | 12 | 75 | 0.8 |
| DS084-24 | 3.2 | (8) | 24 | 70 | 48 | 19 | 21 | 36 | 62 | 14 | 90 | 1.14 |
| DS084-27 | 3.2 | (8) | 27 | 70 | 48 | 19 | 21 | 36 | 62 | 14 | 90 | 1.2 |
| DS084-30 | 4.5 | (12) | 30 | 86 | 60 | 24 | 26 | 45 | 75 | 17 | 112 | 2.2 |
| DS084-33 | 4.5 | (12) | 33 | 86 | 60 | 24 | 26 | 45 | 75 | 17 | 112 | 2.4 |
| DS084-36 | 7 | (16) | 36 | 103 | 72 | 29 | 32 | 54 | 90 | 22 | 135 | 4 |
| DS084-42 | 9 | (24) | 42 | 120 | 82 | 34 | 38 | 63 | 105 | 24 | 158 | 6.43 |
| DS084-48 | 12 | (32) | 48 | 137 | 94 | 38 | 43 | 72 | 120 | 27 | 180 | 9.8
|
Note: Inch or non-standard lengthened bolts can be made according to customer's requirements.
Brief introduction
G80 eye type rotating rings the SAE8620H special alloy forging and high strength quenched and tempered after treatment, according to the standard of a EN1677-4.
And direction safety factor is 4 times.
The rated load than the tradition DIN580 ring screw is more than 5 times higher.
The locking bolt, the ring body can rotate 360 degrees.
In the case of multi limb lifting sling, ring body parts can be automatically adjusted with the direction of rotation or tensile stress angle.
G80 Eye type rotary lifting force form
| Force form | | | | | | |
| |
| Number of limb | 1 | 2 | 1 | 2 | 2 | 2 | 3-4 | 3-4 |
| Load direction | 0° | 0° | 90° | 90° | 0-45°45-60° | asymmetric | 0-45°45-60° | asymmetric |
| Item NO. | Thread M | WLL/T |
| DS084-08 | 8 | 1 | 2 | 0.3 | 0.6 | 0.42 | 0.3 | 0.3 | 0.63 | 0.45 | 0.3 |
| DS084-10 | 10 | 1 | 2 | 0.4 | 0.8 | 0.56 | 0.4 | 0.4 | 0.8 | 0.6 | 0.4 |
| DS084-12 | 12 | 2 | 4 | 0.75 | 1.5 | 1 | 0.75 | 0.75 | 1.5 | 1.1 | 0.75 |
| DS084-14 | 14 | 2 | 4 | 0.75 | 1.5 | 1 | 0.75 | 0.75 | 1.5 | 1.1 | 0.75 |
| DS084-16 | 16 | 4 | 8 | 1.5 | 3 | 2.1 | 1.5 | 1.5 | 3.1 | 2.2 | 1.5 |
| DS084-18 | 18 | 4 | 8 | 1.5 | 3 | 2.1 | 1.5 | 1.5 | 3.1 | 2.2 | 1.5 |
| DS084-20 | 20 | 6 | 12 | 2.3 | 4.6 | 3.2 | 2.3 | 2.3 | 4.8 | 3.4 | 2.3 |
| DS084-22 | 22 | 6 | 12 | 2.3 | 4.6 | 3.2 | 2.3 | 2.3 | 4.8 | 3.4 | 2.3 |
| DS084-24 | 24 | 8 | 16 | 3.2 | 6.4 | 4.5 | 3.2 | 3.2 | 6.7 | 4.8 | 3.2 |
| DS084-27 | 27 | 8 | 16 | 3.2 | 6.4 | 4.5 | 3.2 | 3.2 | 6.7 | 4.8 | 3.2 |
| DS084-30 | 30 | 12 | 24 | 4.5 | 9 | 6.3 | 4.5 | 4.5 | 9.4 | 6.7 | 4.5 |
| DS084-33 | 33 | 12 | 24 | 4.5 | 9 | 6.3 | 4.5 | 4.5 | 9.4 | 6.7 | 4.5 |
| DS084-36 | 36 | 16 | 32 | 7 | 14 | 9.8 | 7 | 7 | 14.7 | 10.5 | 7 |
| DS084-42 | 42 | 24 | 48 | 9 | 18 | 12.6 | 9 | 9 | 18.9 | 13.5 | 9 |
| DS084-48 | 48 | 32 | 64 | 12 | 24 | 16.8 | 12 | 12 | 25 | 18 | 12
|
Products Show:
G80 Lifting Points Catalogues Download:
Package of G80 Lifting Points:
Production Equipment:
Test Equipment:
Application of G80 Eye Type Lifting Screw Points:
We have any other related products, if you have any intrest, please contact us, info@dawson-group.com!
English
