DS-HY Permanent Magnet Electric Suction

DS-HY Permanent Magnet Electric Suction
- Dawson Group Ltd. - China Manufacturer, Supplier, Factory

   

Features of Products

Flexible, low-cost and high efficiency.

Don’t need other clamps, 5-sided machining and need few steps.

Average clamping force on surface to extend the useful life.

Flexible machining, fast setup and rapid replacement of workpiece. Easy to clean and it can also be side clamp, angle cutting.

Self-regulating magnetic pad, can clamp and support irregularly shaped workpieces.

Powerful clamping force can be achieved even stronger than required clamping force.

Clamping area is able to cover the full range of processing, which can process many workpieces to improve the process time.

Application of Products

Applicable to small and medium sized parts and rough workpiece.

Applicable to small parts of the drilling and intensive processing.

The workpiece thickness require above 10mm.

With the magnetic soft claws and sliding block, more features of the workpiece clamping process can be done.

The charm of different magnet

“magnetic pad” is fixed to the surface can lift workpieces to drill hole, mill face and back.

These “magnetic pad” can help suction fixing, sucking up small pieces, and also clean-up the hole. It is very effective On the milling.

Permanent magnetic disk in electric-control design, 2 seconds for charge, either no continuous electric supply, no temperature rise and no changeable on the workpiece.

DS-HY 50*50mm block magnetic pole

Standard	A(mm)	B(mm)	C(mm)	Weight(kg)	Pole NO.(pc)
DS-HY50-2050	240	450	69	58	18
DS-HY50-2060	240	630	69	81	24
DS-HY50-2080	240	780	69	101	30
DS-HY50-20100	240	930	69	120	36
DS-HY50-3030	300	300	69	48	16
DS-HY50-3040	330	360	69	64	20
DS-HY50-3050	300	450	69	73	24
DS-HY50-3060	300	630	69	102	32
DS-HY50-3080	300	780	69	126	40
DS-HY50-30100	300	930	69	150	48
DS-HY50-4050	420	450	69	102	36
DS-HY50-4060	420	630	69	142	48
DS-HY50-4080	420	780	69	176	60
DS-HY50-40100	420	930	69	210	72
DS-HY50-5050	480	450	69	116	42
DS-HY50-5060	480	630	69	163	56
DS-HY50-5080	480	780	69	202	70
DS-HY50-50100	480	930	69	240	84
DS-HY50-6060	600	630	69	203	72
DS-HY50-6080	600	780	69	252	90
DS-HY50-60100	600	930	69	300	108

DS-HY 70*70mm block magnetic pole

Standard	A(mm)	B(mm)	C(mm)	Weight(kg)	Pole No.(pc)
DS-HY70-3040	300	410	69	66	12
DS-HY70-3060	300	600	69	97	18
DS-HY70-3080	300	790	69	128	24
DS-HY70-30100	300	980	69	158	30
DS-HY70-4040	380	410	69	84	16
DS-HY70-4060	380	600	69	123	24
DS-HY70-4080	380	790	69	162	32
DS-HY70-40100	380	980	69	200	40
DS-HY70-5060	460	600	69	149	30
DS-HY70-5080	460	790	69	196	40
DS-HY70-50100	460	980	69	243	50
DS-HY70-6060	620	600	69	200	42
DS-HY70-6080	620	790	69	264	56
DS-HY70-60100	620	980	69	327	70

Floating magnetic pad for coarse or deformation on the surface of the clip has a unique absorption method.

Magnetic pad consists of 2 piece of 45 steel piece. Degaussing state in chuck jaw workpiece, and in the position state without deformation.

Electro-Magnetic Chuck Controller(filled demagntion controller, rectifier)

Product performance

Input voltage AC 220V or 380V, DC output voltage 0-110V, current capacity of 2-25A, demagnetization time of 2-30 seconds, Perennial with 350W, 5500W, 1000W, 1500W, 1500W, 2000W, 2500W Eiectro-Magnetic Chuck Controller(filled demagnetization controllers, rectiflers), can effectively prevent the milling cutter magnetization, most suitable for”standard rectangular electromagnetic sucker”and”strong electromagnetic sucker”.

For further information, please contact us. Email:info@dawson-group.com

Permanent Magnetic Lifter
Dawson Automatic Permanent Magnetic Lifter for Lifting Steel Plate	DS-PML-A Type Permanent Magnetic Lifter
DS-PML-D Type Permanent Magnetic Lifter	DS-PML-L Type Permanent Magnetic Lifter
DS-PML Type Permanent Magnetic Lifter

Other related products:

Application of Dawson Automatic Permanent Magnetic Lifter:

Permanent Magnetic Lifter Catalogue Download：

Factory & Package Show: