JACK STAND TYPE DSJS-A02 DSJS-A03 DSJS-A06 DSJS-A12 CAPACITY 2T 3T 6T 12T MAX. HEIGHT 390MM 430MM 610MM 760MM MIN. HEIGHT 260MM 300MM 405MM 485MM NET WEIGHT 5.2KG 7KG 13KG 28KG PACKAGE DIMENSION 220X170X310MM 220X180X340MM 300X260X460MM 340X330X600MM
	TYPE DSJS-B05 DSJS-B22 CAPACITY 5T 22T MAX. HEIGHT 410MM 510MM MIN. HEIGHT 310MM 365MM NET WEIGHT 17KG 31.5KG PACKAGE DIMENSION 315X250X255MM 370X270X335MM

Instructions:

1. Set the parking brake and put the car in gear.

2. Jack up the car using a floor jack.

3. Place the jack stands under the car, your car's owner's manual may have illustrations indicating safe jack stand positioning.

4. Lower the jack slowly until the car is resting on the jack stands.

5. Note that if you do not have a floor jack, you can use the tire-changing jack by raising up one side of the car at a time,as you would if changing a tire, and placing a jack stand first on one side, then lower and removing the jack, then repeating on the other side.

6. Lean on the bumper and shake the car, if the jack stands are not positioned properly, you want to find out now, not when you are under the car.

Tips and Warnings:

1. Make sure both jack stands are raised to equal height.

2. Never get under a car that is supported only by a jack, that is extremely dangerous.

3. Do not put the jack stands under the floorboards, they will crash right through into the inside of the car.