DAWSON/OEM
DS-JM125-1、 DS-JM250-1、DS-JM500-1、DS-JM980-2
Availability: | |
---|---|
Quantity: | |
Product name:DS-JM Fixed pneumatic hoist
Model:DS-JM125-1、DS-JM250-1、DS-JM500-1、DS-JM980-2
Advantage:
■ It is suitable in complicated and dangerous environment
■ Stable operation with low impact; Starting with load
■ Stepless speed regulation
■ Air cut-off protection
■ Reliable brake
■ Low failure rate and long service life
Principle
The pressure of compressed air can be transformed into mechanical energy through pneumatic motor, thus the output torque will drive the planetary reducer. Then the pneumatic controller will control the rotation of slewing gear to lift the load.
Feature
■ Precision parts such as motor and piston are all manufactured by imported high-precision CNC machine center;
■ The planetary gear adopts alloy steel with standard heat treatment and lubricated by extreme pressure lithium lubricating grease;
■ The chains use T8 level calibrated short chain, which satisfy the maximum allowable load coefficient under different working levels.
■ Hooks adopt the highest level in GB/T 10051 strength levels – V level,low volume, low weight, good performance.
Boundary Dimension | |||||
Mode | DS-JM125-1 | DS-JM250-1 | DS-JM500-1 | DS-JM980-2 | |
A | mm | 492 | 492 | 492 | 492 |
B | mm | 210 | 210 | 210 | 210 |
C | mm | 173 | 173 | 173 | 173 |
D | mm | 229 | 229 | 229 | 229 |
E | mm | 363 | 363 | 363 | 363 |
F | mm | 160 | 160 | 160 | 160 |
G | mm | 203 | 203 | 203 | 203 |
Hmin | mm | 440 | 440 | 440 | 440 |
J | mm | 42.5 | 42.5 | 42.5 | 42.5 |
K | mm | 167.5 | 167.5 | 167.5 | 167.5 |
∅1 | mm | 40 | 40 | 40 | 40 |
∅2 | mm | 34 | 34 | 34 | 34 |
M1 | mm | 32 | 32 | 32 | 32 |
M2 | mm | 27 | 27 | 27 | 27 |
Technical Parameters | |||||
Mode | DS-JM125-1 | DS-JM250-1 | DS-JM500-1 | DS-JM980-2 | |
Working Class | M3 | ||||
Lifting Capacity | t | 0.125 | 0.25 | 0.5 | 0.98 |
Lifting Height | m | 3 | 3 | 3 | 3 |
Quantity of Chains | 1 | 1 | 1 | 2 | |
Motor Output Power | kw | 0.75 | 0.75 | 0.75 | 0.75 |
Working Air-pressure | bar(kg/cm2) | 4~6 | 4~6 | 4~6 | 4~6 |
Ascending Velocity (Without Load) | m/min | 35 | 30 | 20 | 9 |
Ascending Velocity (Rated Load) | m/min | 20 | 15 | 10 | 5 |
Descending Velocity (Rated Load) | m/min | 34 | 30 | 20 | 10 |
Descending Velocity (Without Load) | m/min | 23 | 20 | 14 | 7 |
Air Consumption | m3/min | 1 | 1 | 1.3 | 1.3 |
Gas-type Fitting | in | Rc1/2 | Rc1/2 | Rc1/2 | Rc1/2 |
Air Pipe Inner Diameter | mm | 12 | 12 | 12 | 12 |
Load Chain Diameter | mm | 6×18 | 6×18 | 6×18 | 6×18 |
Length of Controller Pipe | m | 3 | 3 | 3 | 3 |
Ascending Noise (Rated Load) | db | 76 | 76 | 76 | 76 |
Descending Noise (Rated Load) | db | 79 | 79 | 79 | 79 |
Weight | kg | 23 | 23 | 23 | 30 |
Note: 1. The length of controller is 3m according to standard lifting height;
2. The weight is calculated by the lifting height of 3m.
Welcome to buy the newest and competitive price DAWSON DS-JM 0.125 Tons - 0.98 Tons Fixed Pneumatic Hoist, Pneumatic Chain Hoists, Air Chain Hoist, Air Powered Hoist from our factory. We're one of the leading China manufacturers and suppliers, offering you the wholesale service and the OEM service at a discount. With CE certification, our products made in China in stock are high in quality and low in price. Please be free to get the free sample from us.
Other related products:
Application for Pneumatic Air Hoist:
Factory and Package:
Product name:DS-JM Fixed pneumatic hoist
Model:DS-JM125-1、DS-JM250-1、DS-JM500-1、DS-JM980-2
Advantage:
■ It is suitable in complicated and dangerous environment
■ Stable operation with low impact; Starting with load
■ Stepless speed regulation
■ Air cut-off protection
■ Reliable brake
■ Low failure rate and long service life
Principle
The pressure of compressed air can be transformed into mechanical energy through pneumatic motor, thus the output torque will drive the planetary reducer. Then the pneumatic controller will control the rotation of slewing gear to lift the load.
Feature
■ Precision parts such as motor and piston are all manufactured by imported high-precision CNC machine center;
■ The planetary gear adopts alloy steel with standard heat treatment and lubricated by extreme pressure lithium lubricating grease;
■ The chains use T8 level calibrated short chain, which satisfy the maximum allowable load coefficient under different working levels.
■ Hooks adopt the highest level in GB/T 10051 strength levels – V level,low volume, low weight, good performance.
Boundary Dimension | |||||
Mode | DS-JM125-1 | DS-JM250-1 | DS-JM500-1 | DS-JM980-2 | |
A | mm | 492 | 492 | 492 | 492 |
B | mm | 210 | 210 | 210 | 210 |
C | mm | 173 | 173 | 173 | 173 |
D | mm | 229 | 229 | 229 | 229 |
E | mm | 363 | 363 | 363 | 363 |
F | mm | 160 | 160 | 160 | 160 |
G | mm | 203 | 203 | 203 | 203 |
Hmin | mm | 440 | 440 | 440 | 440 |
J | mm | 42.5 | 42.5 | 42.5 | 42.5 |
K | mm | 167.5 | 167.5 | 167.5 | 167.5 |
∅1 | mm | 40 | 40 | 40 | 40 |
∅2 | mm | 34 | 34 | 34 | 34 |
M1 | mm | 32 | 32 | 32 | 32 |
M2 | mm | 27 | 27 | 27 | 27 |
Technical Parameters | |||||
Mode | DS-JM125-1 | DS-JM250-1 | DS-JM500-1 | DS-JM980-2 | |
Working Class | M3 | ||||
Lifting Capacity | t | 0.125 | 0.25 | 0.5 | 0.98 |
Lifting Height | m | 3 | 3 | 3 | 3 |
Quantity of Chains | 1 | 1 | 1 | 2 | |
Motor Output Power | kw | 0.75 | 0.75 | 0.75 | 0.75 |
Working Air-pressure | bar(kg/cm2) | 4~6 | 4~6 | 4~6 | 4~6 |
Ascending Velocity (Without Load) | m/min | 35 | 30 | 20 | 9 |
Ascending Velocity (Rated Load) | m/min | 20 | 15 | 10 | 5 |
Descending Velocity (Rated Load) | m/min | 34 | 30 | 20 | 10 |
Descending Velocity (Without Load) | m/min | 23 | 20 | 14 | 7 |
Air Consumption | m3/min | 1 | 1 | 1.3 | 1.3 |
Gas-type Fitting | in | Rc1/2 | Rc1/2 | Rc1/2 | Rc1/2 |
Air Pipe Inner Diameter | mm | 12 | 12 | 12 | 12 |
Load Chain Diameter | mm | 6×18 | 6×18 | 6×18 | 6×18 |
Length of Controller Pipe | m | 3 | 3 | 3 | 3 |
Ascending Noise (Rated Load) | db | 76 | 76 | 76 | 76 |
Descending Noise (Rated Load) | db | 79 | 79 | 79 | 79 |
Weight | kg | 23 | 23 | 23 | 30 |
Note: 1. The length of controller is 3m according to standard lifting height;
2. The weight is calculated by the lifting height of 3m.
Welcome to buy the newest and competitive price DAWSON DS-JM 0.125 Tons - 0.98 Tons Fixed Pneumatic Hoist, Pneumatic Chain Hoists, Air Chain Hoist, Air Powered Hoist from our factory. We're one of the leading China manufacturers and suppliers, offering you the wholesale service and the OEM service at a discount. With CE certification, our products made in China in stock are high in quality and low in price. Please be free to get the free sample from us.
Other related products:
Application for Pneumatic Air Hoist:
Factory and Package:
content is empty!